HSS Combination Drill-Tap M8
(Pack of
1.0)
• Eliminates the need for using a twist drill and a separate tap to achieve a tapped hole
• 118° spiral point
• Three positive driving flats on the shank
• Neck is reduced below minor diameter for added clearance
• Made of M1 high-speed steel
• Made in USA
• Ideal for cordless drills; can be used in hand-held or stationary drills for tapping through holes
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
HSS Combination Drill-Tap 1/4-20
Couldn't load pickup availability
Cryo-Drap 7PC USS Sizes Screw Set, 135o Split Point, W/ Flats
Couldn't load pickup availability
HSS Combination Drill-Tap 7/16-14
Couldn't load pickup availability
Steel Crimped Cup Brush 1-3/4"
Couldn't load pickup availability
Curved Wood Handle Scratch Brush
Couldn't load pickup availability
Aluminum Oxide Grain Locking Grinding Disc 2"
Couldn't load pickup availability
Molding Clip with Sealer Nylon White 11.5 x 21
Couldn't load pickup availability
Rocker Molding Clip with Sealer Nylon Gray 12mm
Couldn't load pickup availability
Rivet Nylon 1/4"
Couldn't load pickup availability
Pilotdrive Cryotap M10 x 1.5 Metric Tri-Pak, Taper, Plug, Bottoming
Couldn't load pickup availability
Cryotap #10-24 Tri-Pak
Couldn't load pickup availability
Cryotap 1/2"-13 Bottoming Hand Tap
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 5/32"
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 3/8" (M10)
Couldn't load pickup availability
Spot Weld Remover Drill Bit Kit 11Pcs
Couldn't load pickup availability
Product Description
• Eliminates the need for using a twist drill and a separate tap to achieve a tapped hole• 118° spiral point
• Three positive driving flats on the shank
• Neck is reduced below minor diameter for added clearance
• Made of M1 high-speed steel
• Made in USA
• Ideal for cordless drills; can be used in hand-held or stationary drills for tapping through holes
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 27383 |
|---|---|
| Type | Combination Drill Tap |
| Point | 118° Split |
| Diameter | M8 |
| Pitch | 1.25 mm |
| Tap Length | 0.6900 " |
| Material Thickness | 5/8 " |
| Material | HSS |
| Overall Length | 3.68 " |
| UNSPSC #: | 23241615 |
| TAA Compliant: | Yes |
| Weight: | 0.05 lb |
Product Restrictions
