Pilotdrive Cryotap 5/16"-18 Starter Hand Tap
(Pack of
1)
SKU:DY80635011 Item#: DY80635011
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Polymer Wheel Rubber Eraser 30mm
$0.00
Couldn't load pickup availability
Scotch-Brite Roloc Bristle Disc 2"
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 3" (M10)
$0.00
Couldn't load pickup availability
Cross-Over Socket Set, Metric, 3/8" Drive, 10pc
$0.00
Couldn't load pickup availability
13-position, Indexable Universal Ergo Hammer
$0.00
Couldn't load pickup availability
Adhesive-Back Shim Stock 1/8 x 5/8" x 50'
$0.00
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Fender Bumper Shield Retainer 11/16"
$0.00
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 10mm Hole
$0.00
Couldn't load pickup availability
HSS Spiral Point Hand Tap M6 x 1
$0.00
Couldn't load pickup availability
HSS Spiral Point Hand Tap 5-40
$0.00
Couldn't load pickup availability
Pilotdrive Cryotap M18 x 1.5 Starter Hand Tap
$0.00
Couldn't load pickup availability
4-Flute HSS Bottoming Hand Tap M14 x 2
$0.00
Couldn't load pickup availability
4-Flute HSS Bottoming Hand Tap M4 x 0.7
$0.00
Couldn't load pickup availability
Carbon Steel Replacement Hand Tap M12 x 1.75
$0.00
Couldn't load pickup availability
Small Index-Tend Pry Bar
$0.00
Couldn't load pickup availability
Comfort Grip Ergonomic Jumbo Awl, 4 pc Hook & Pick Set
$0.00
Couldn't load pickup availability
9" Hi-Level Heavy-Duty Power Jaw Plier-Cutter
$0.00
Couldn't load pickup availability
Product Description
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | DY80635011 |
|---|---|
| Type | Fractional |
| Diameter | 5/16 " |
| Pitch | 18 |
| Flutes | 4 |
| Thread Length | 11/16 " |
| H Limits | H3 |
| Overall Length | 2-23/32 " |
| Recommended Drill Size | F |
| UNSPSC #: | 23241615 |
| TAA Compliant: | No |
| Weight: | 0.045 lb |
Product Restrictions
