Pilotdrive Cryotap 7/8"-9 Starter Hand Tap
(Pack of 1)

SKU:DY80635027 Item#: DY80635027

CryoTool®

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Check Availability

Quantity

Frequently Bought Together

Air Saw Blade 4" 32TPI

Spot Weld Remover Drill Bit HSS 3" (M10)

M2 Sheet Metal Hole Cutter 3/8"

Adhesive-Back Shim Stock 5/32 x 3/8" x 30'

Adhesive-Back Shim Stock 5/16 x 1/2" x 30'

Round Turbo Mixer 18 Element with Integrated Nut

Air Distributor Defroster Push-Type Retainer

Nylon Cable Tie 11-3/4" Black

Fender Splash Shield Retainer Nylon 20mm

Pilotdrive Cryotap 1/4"-20 Starter Hand Tap

Item#: DY80635009

HSS Spiral Point Hand Tap 1-14

HSS Spiral Point Hand Tap M10 x 1.5

HSS Combination Drill-Tap 10-24

HSS Combination Drill-Tap 10-24

HSS Combination Drill-Tap M8

Polymer Wheel Rubber Eraser 30mm

2Pc Index-Tend Pry Bar Set

Item#: DY89320014

8Pc Metric Flare Nut Wrench Set

Item#: DY89310185

Product Description

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Technical Specifications

Item#:	DY80635027
Type	Fractional
Diameter	7/8 "
Pitch	9
Flutes	4
Thread Length	2-7/32 "
H Limits	H4
Overall Length	4-11/16 "
Recommended Drill Size	49/64 "
UNSPSC #:	23241615
TAA Compliant:	No
Weight:	0.42 lb

Product Restrictions

Suggested Products

Spot Weld Remover Drill Bit HSS 2-13/16(M8)

Sheet Metal Drill Bit Alloy Steel 1/8"

Spot Weld Remover Drill Bit HSS 1/4" (M6)

Spot Weld Remover Drill Bit HSS 3/8" (M10)

Abrasive Hand Pad All Purpose 6 x 9"

Sheet Metal Drill Bit Alloy Steel 1/4"

Twist-On Abrasive Disc 2"

Sheet Metal Drill Bit Alloy Steel 3/16"

Spot Weld Remover Drill Bit Cobalt 5/16" (M8)

Scotch-Brite Roloc Bristle Disc 2"

Scotch-Brite Roloc Bristle Disc 2"

Twist-On Abrasive Disc 2"

Your Recently Viewed Items