Pilotdrive Cryotap M14 x 2.0 Starter Hand Tap
(Pack of 1)

SKU:DY80636024 Item#: DY80636024

CryoTool®

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Check Availability

Quantity

Frequently Bought Together

Twist-On Abrasive Disc 3"

Abrasive Hand Pad Commercial Grade 6 x 9"

Steel Crimped End Brush 1/2"

Adhesive-Back Shim Stock 9/16 x 1" x 30'

DTM Primer Tan

Adhesive-Back Shim Stock 7/16 x 3/4" x 30'

Front Fender Push-Type Retainer Nylon 18mm

Shroud Insulating Button Nylon 11/16"

Front Bumper Drive Rivet Plastic 10mm Hole

Pilotdrive Cryotap #6-32 Starter Hand Tap

Item#: DY80635002

HSS Spiral Point Hand Tap 8-32

Pilotdrive Cryotap 1"-8 Starter Hand Tap

Item#: DY80635029

3-Flute HSS Plug Hand Tap M2 x 0.4

HSS Combination Drill-Tap M12

HSS Left Hand Plug Tap 3/8-24

8Pc SAE Mini Combination Wrench Set

Item#: DY89311320

Wire Stripper-Cutter 6" Stainless Steel Jaws

Hex Key Set, Balldriver, Ball Hex, 9pc

Product Description

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Technical Specifications

Item#:	DY80636024
Type	Metric
Diameter	M14
Pitch	2.0 mm
Flutes	4
Overall Length	3-19/32 "
Recommended Drill Size	12 mm
UNSPSC #:	23241615
TAA Compliant:	No
Weight:	0.135 lb

Product Restrictions

Suggested Products

Spot Weld Remover Drill Bit HSS 2-13/16(M8)

Sheet Metal Drill Bit Alloy Steel 1/8"

Spot Weld Remover Drill Bit HSS 1/4" (M6)

Spot Weld Remover Drill Bit HSS 3/8" (M10)

Abrasive Hand Pad All Purpose 6 x 9"

Sheet Metal Drill Bit Alloy Steel 1/4"

Twist-On Abrasive Disc 2"

Sheet Metal Drill Bit Alloy Steel 3/16"

Spot Weld Remover Drill Bit Cobalt 5/16" (M8)

Scotch-Brite Roloc Bristle Disc 2"

Scotch-Brite Roloc Bristle Disc 2"

Twist-On Abrasive Disc 2"

Your Recently Viewed Items