Pin Drive Expansion Anchor Steel 5/8 x 4"
(Pack of
5.0)
• A positive drive, positive setting, impact-expansion type concrete anchor for use in all masonry materials
• The only installation tools needed are a drill to bore the hole and a hammer to set the anchor
• The anchor body is carbon steel, and the drive pin is hardened steel
• Can be inspected visually after set
• High pull-out and shear strength
• Plated with zinc and dichromate
• Made in USA
• Applications: Outlet boxes, stadium seats, steel and wood plates, machine anchoring, water and gas meters, mailboxes, cash machines, conveyor belt mounts, bracing, shelving, hand and guard rails, grain and storage bins, light fixtures, steel buildings
1. Drill hole of sufficient depth using same diameter DFS bit as anchor being installed.
2. Turn nut on anchor as required. May be flush with top, or continue turning to provide stud finish.
3. With nut, washer and drive pin in place, insert anchor into hole.
4. Using the proper size hammer, set pin with several sharp, square strikes on head of pin until pin is flush with top of anchor. Anchor is now properly set. No need to torque nut.
WARNING: Wear eye protection
Frequently Bought Together
Conical Screw Anchor Kit Plastic 301Pcs
Couldn't load pickup availability
Conical Screw Anchor Kit Plastic 401Pcs
Couldn't load pickup availability
Masonry Anchor Assortment 700Pcs
Couldn't load pickup availability
Pin Drive Expansion Anchor Steel 5/8 x 6"
Couldn't load pickup availability
Pin Drive Expansion Anchor Steel 3/8 x 2-3/8"
Couldn't load pickup availability
Lag Screw Shield Anchor Long Style 1/2 x 3"
Couldn't load pickup availability
Open End Rivet Dome Head Aluminum 5/32"
Couldn't load pickup availability
DIN 6921 Hex Flange Bolt Grade 8.8 M8-1.25 x 16mm
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M6-1 x 30mm
Couldn't load pickup availability
Fender Apron Drive Rivet 8mm Hole
Couldn't load pickup availability
Inner Fender Shield Attaching Clip Nylon Black
Couldn't load pickup availability
Specialty Rivet with Plastic Cap Aluminum 3.2mm
Couldn't load pickup availability
Product Description
• A positive drive, positive setting, impact-expansion type concrete anchor for use in all masonry materials• The only installation tools needed are a drill to bore the hole and a hammer to set the anchor
• The anchor body is carbon steel, and the drive pin is hardened steel
• Can be inspected visually after set
• High pull-out and shear strength
• Plated with zinc and dichromate
• Made in USA
• Applications: Outlet boxes, stadium seats, steel and wood plates, machine anchoring, water and gas meters, mailboxes, cash machines, conveyor belt mounts, bracing, shelving, hand and guard rails, grain and storage bins, light fixtures, steel buildings
1. Drill hole of sufficient depth using same diameter DFS bit as anchor being installed.
2. Turn nut on anchor as required. May be flush with top, or continue turning to provide stud finish.
3. With nut, washer and drive pin in place, insert anchor into hole.
4. Using the proper size hammer, set pin with several sharp, square strikes on head of pin until pin is flush with top of anchor. Anchor is now properly set. No need to torque nut.
WARNING: Wear eye protection
Technical Specifications
| Item#: | 59619 |
|---|---|
| Anchor Size | 5/8 " |
| Length | 4 " |
| Type | Pin Drive Anchor |
| Material | Carbon Steel |
| Finish | Zinc |
| Size | 5/8X4 " |
| UNSPSC #: | 31162101 |
| TAA Compliant: | Yes |
| Weight: | 2.25 lb |
Product Restrictions
