Steel Circular Flared Flat End Brush, 1-1/2" Outer Diameter, 1/4" Shank Diameter, 7/8" Shank Length, 20000RPM Operating Speed
(Pack of
1)
• Outlast standard brushes by at least 2-to-1
• High tensile, heat-treated wire for excellent fatigue resistance and fast cutting capabilities
• Provide continuous cutting action, uniform surface contaminant removal and a smooth finish
• Quality is continuously checked during the manufacturing process; brush samples must remain 100% intact when tested at 120% of their rated operating speed
• Unique manufacturing process neatly arranges wire so each tuft contains the same count
• For spot facing, rubber or plastic flash removal, scale or slag removal, rust or paint removal, die, mold and tool polishing, cleaning or finishing recessed areas, weld cleaning, and carbon cleaning
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Frequently Bought Together
Stemmed Crimped Wire Wheel 3"
Couldn't load pickup availability
Steel Circular Flared End Brush 3"
Couldn't load pickup availability
Standard Twist Knot-Type Wire Wheel 3"
Couldn't load pickup availability
Twist-On Abrasive Disc 2"
Couldn't load pickup availability
Zirconium Grain Locking Grinding Disc 2"
Couldn't load pickup availability
Reinforced Mini Cut-Off Wheel 3"
Couldn't load pickup availability
Gasket Remover Brush 3/4"x7/8", .006 Wire Dia., 1/4" Shank
Couldn't load pickup availability
Stainless Steel Crimped End Brush 1"
Couldn't load pickup availability
Gasket Remover Brush 3/4"x7/8", .006 SS Wire Dia., 1/4" Shank
Couldn't load pickup availability
Bumper Radiator and Grille Drive Rivet 7mm Hole
Couldn't load pickup availability
Specialty Rivet with Plastic Cap Aluminum 3.2mm
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
Couldn't load pickup availability
Twist-On Abrasive Disc 2"
Couldn't load pickup availability
Interchangeable Hex Bit Set 24Pc SAE
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 1/4"
Couldn't load pickup availability
Product Description
• Outlast standard brushes by at least 2-to-1• High tensile, heat-treated wire for excellent fatigue resistance and fast cutting capabilities
• Provide continuous cutting action, uniform surface contaminant removal and a smooth finish
• Quality is continuously checked during the manufacturing process; brush samples must remain 100% intact when tested at 120% of their rated operating speed
• Unique manufacturing process neatly arranges wire so each tuft contains the same count
• For spot facing, rubber or plastic flash removal, scale or slag removal, rust or paint removal, die, mold and tool polishing, cleaning or finishing recessed areas, weld cleaning, and carbon cleaning
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Technical Specifications
| Item#: | 89206 |
|---|---|
| Type | Circular Flared - Flat |
| Material | Steel |
| O.D. | 1-1/2 " |
| Wire Gauge | 0.020 " |
| Maximum RPM | 20,000 |
| Shank Size | 1/4 " |
| Shank Length | 7/8 " |
| UNSPSC #: | 27111907 |
| TAA Compliant: | Yes |
| Weight: | 0.14 lb |
Product Restrictions
