Thread Rolling Screw, Slotted Hex Washer Head, Steel, Yellow Zinc Finish, Coarse Thread, #10-24 x 1/2"
(Pack of
100)
SKU:93562 Item#: 93562
• Made in USA with quality, dependability and traceability
• Heat-treated and case-hardened to exceed SAE Grade 5 strength properties
• The exclusive “L” mark on the head identifies it as a Lawson-engineered fastener
• A 3:1 improvement in corrosion resistance as measured by salt-spray testing (ASTM B117)
• Three-thread lead chamfer
• High head with deep slot
• Forms (not cuts) thread
• No chips
• 50% greater thread engagement
• Improved breakaway torque
• Increased resistance to back-out
• Improved vibration resistance
• No need for lockwasher
• Meets or exceeds ANSI B18.6.3, SAE J478 and SAE J82
• Can be used in tapped holes, with nuts or without
• Use to repair damaged threads
Frequently Bought Together
Open End Rivet Dome Head Aluminum 3/16"
$0.00
Couldn't load pickup availability
Open End Rivet Dome Head Aluminum 3/16"
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M8-1.25 x 20mm
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M8-1.25 x 30mm
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M8-1.25 x 16mm
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 30mm
$0.00
Couldn't load pickup availability
Sheet Metal Screw Phillips Truss Head #14 x 3/4"
$0.00
Couldn't load pickup availability
Self-Drilling Screw Hex Head 1/4-14 x 1-1/4"
$0.00
Couldn't load pickup availability
Sheet Metal Screw Slotted Hex Head #14 x 3/4"
$0.00
Couldn't load pickup availability
Bumper and Wheel Well Liner Push-Type Retainer
$0.00
Couldn't load pickup availability
Fender Apron Drive Rivet 8mm Hole
$0.00
Couldn't load pickup availability
Engine Under Cover Drive Rivet Plastic 7mm Hole
$0.00
Couldn't load pickup availability
Thread Rolling Screw Hex Head #10-24 x 3/4"
$0.00
Couldn't load pickup availability
Thread Rolling Screw Hex Head #6-32 x 1/4"
$0.00
Couldn't load pickup availability
Thread Rolling Screw Hex Head #8-32 x 1/2"
$0.00
Couldn't load pickup availability
Product Description
• Made in USA with quality, dependability and traceability• Heat-treated and case-hardened to exceed SAE Grade 5 strength properties
• The exclusive “L” mark on the head identifies it as a Lawson-engineered fastener
• A 3:1 improvement in corrosion resistance as measured by salt-spray testing (ASTM B117)
• Three-thread lead chamfer
• High head with deep slot
• Forms (not cuts) thread
• No chips
• 50% greater thread engagement
• Improved breakaway torque
• Increased resistance to back-out
• Improved vibration resistance
• No need for lockwasher
• Meets or exceeds ANSI B18.6.3, SAE J478 and SAE J82
• Can be used in tapped holes, with nuts or without
• Use to repair damaged threads
Technical Specifications
| Item#: | 93562 |
|---|---|
| Diameter | #10 |
| Thread Pitch | 24 |
| Length | 1/2 " |
| Head Style | Hex Washer |
| Drive | Slotted |
| Finish | Bright Zinc |
| Material | Carbon Steel |
| Thread | Coarse |
| Type | Thread Rolling Screw |
| Size | 10-24X1/2 " |
| UNSPSC #: | 31161512 |
| TAA Compliant: | Yes |
| Weight: | 0.55 lb |
