TIG Welding Tungsten Electrode, Gold Tipped, 1.5% Lanthanated, 7" Length, 3/32"
(Pack of
10)
SKU:P14575 Item#: P14575
• Non-radioactive Lanthanum Tungsten TIG electrodes eliminate the potential of interference with special equipment and reduces rate of vaporization or burn-off
• Will operate with alternating current or direct current either polarity
• The addition of lanthanum also lowers the temperature at which the electrode emits electrons allowing the electrode to operate cooler so higher currents can be used
• Lanthanum improves arc initiation and arc stability
• Longer life
• Less contamination
• Length: 7" (18cm)
• Identification: gold tipped
• Meets AWS specifications for EWLa-2
NOTE: Use argon shielding gas with a gas lens collet body for optimum performance.
Frequently Bought Together
Rocker Panel Molding Clip Nylon White 12 x 20mm
$0.00
Couldn't load pickup availability
Front/Rear Bumper Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Bumper Clip Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
SR17/18 TIG Welding Standard Collet Body 0.04"
$0.00
Couldn't load pickup availability
SR17/18 TIG Welding Alumina Gas Cup #4
$0.00
Couldn't load pickup availability
SR18 TIG Welding Long Torch Cap
$0.00
Couldn't load pickup availability
710 Stainless Steel Electrode 3/32"
$0.00
Couldn't load pickup availability
Heat Stick 650F Degrees
$0.00
Couldn't load pickup availability
Heat Stick 850F Degrees
$0.00
Couldn't load pickup availability
Oxy Acetylene Oxygen Torch Side Connector
$0.00
Couldn't load pickup availability
Oxy Acetylene Fuel Gas Torch Side Connector
$0.00
Couldn't load pickup availability
Oxy Acetylene Fuel Gas Single Replacement Flint
$0.00
Couldn't load pickup availability
Product Description
• Non-radioactive Lanthanum Tungsten TIG electrodes eliminate the potential of interference with special equipment and reduces rate of vaporization or burn-off• Will operate with alternating current or direct current either polarity
• The addition of lanthanum also lowers the temperature at which the electrode emits electrons allowing the electrode to operate cooler so higher currents can be used
• Lanthanum improves arc initiation and arc stability
• Longer life
• Less contamination
• Length: 7" (18cm)
• Identification: gold tipped
• Meets AWS specifications for EWLa-2
NOTE: Use argon shielding gas with a gas lens collet body for optimum performance.
Technical Specifications
| Item#: | P14575 |
|---|---|
| Welding Process | TIG |
| Type | Lanthanated |
| Components | Tungsten Electrode |
| Diameter | 3/32 " |
| Length | 7 " |
| Description | 1.5% Lanthanated |
| UNSPSC #: | 23271700 |
| TAA Compliant: | No |
| Weight: | 0.39 lb |
