Utility Knife, Auto-Load
(Pack of
1.0)
No need to take the knife apart to change blades
Blade may be re-used by flipping over and inserting the used end back into blade slot while holding down the blade release button
Uses any standard two-notch utility blade
Blade changing instructions1. Remove the used blade by pushing the release button.2. Pull the slide knob into full back position to load a new blade.3. Push slide knob forward to expose new blade.
Frequently Bought Together

Utility Knife, Folding , 4" Closed
Couldn't load pickup availability

Cross-Over Socket Extension Set, 3/8" Drive, 3 Piece
Couldn't load pickup availability

12" Auto-Adjust Pliers
Couldn't load pickup availability

Utility Knife, Folding , 4" Closed
Couldn't load pickup availability

Razor Blade Single Edge w/Notch
Couldn't load pickup availability

Razor Blade, Single Edge, High Carbon Steel
Couldn't load pickup availability

Rear Bumper Cover Retainer Plastic 18mm
Couldn't load pickup availability

Bumper and Wheel Well Liner Push-Type Retainer
Couldn't load pickup availability

Acrysol Auto Body Degreaser 16oz
Couldn't load pickup availability

Spot Weld Remover Drill Bit HSS 2-13/16(M8)
Couldn't load pickup availability

Sheet Metal Drill Bit Alloy Steel 1/8"
Couldn't load pickup availability

Utility Knife, Folding , 4" Closed
Couldn't load pickup availability

Utility Knife, Metal Handle
Couldn't load pickup availability

Retractable Utility Knife
Couldn't load pickup availability

Retractable Utility Knife
Couldn't load pickup availability
Product Description
No need to take the knife apart to change blades Blade may be re-used by flipping over and inserting the used end back into blade slot while holding down the blade release button
Uses any standard two-notch utility blade
Blade changing instructions1. Remove the used blade by pushing the release button.2. Pull the slide knob into full back position to load a new blade.3. Push slide knob forward to expose new blade.
Technical Specifications
Item#: | 50122 |
---|---|
Type | Auto-Load |
Material | Zinc Die Cast |
Finish | Powder Coated |
Color | Yellow/Black |
UNSPSC #: | 27111503 |
TAA Compliant: | No |
Weight: | 0.54 lb |
Product Restrictions




