Wear Plates Used By Maintenance Welder 1/4X4X5
(Pack of
1)
Wearplates for maintenance. Plates are smaller wearplates designed for use by the maintenance welder. They can be torch cut to any dimension and are small enough to fit around most contoured surfaces.
• Economical – Cost less and last longer and can be applied up to 15 times faster than conventional hardfacing
• Wear Resistant – Through hardened to 62Rc and will outlast conventional hardfacing by up to ten times
• Less Distortion – Much less welding required for application
• 1/4" and 3/8" plates designed to resist moderate impact
• Hardness: 62 Rc
• ASTM G65 Abrasion Test: 96.35 mm³ vol. loss
Frequently Bought Together
Woven Polyester Electrical Tape 19mm x 25m
Couldn't load pickup availability
Engine Under Cover Drive Rivet Plastic 7mm Hole
Couldn't load pickup availability
Bumper Fascia General Purpose Split Rivet 3/16"
Couldn't load pickup availability
3/8 on 3/8 Dimension I Double Pass Overlay
Couldn't load pickup availability
1/4 on 1/4 Dimension I Double Pass Overlay
Couldn't load pickup availability
3/16 on 3/16 Dimension I Single Pass Overlay
Couldn't load pickup availability
Solid Solder 1/32"
Couldn't load pickup availability
AWS E71T-11 Carbon Steel MIG Flux Core Welding Wire .045" 33lb
Couldn't load pickup availability
AWS E71T-11 Carbon Steel MIG Flux Core Welding Wire .035" 33lb
Couldn't load pickup availability
Product Description
Wearplates for maintenance. Plates are smaller wearplates designed for use by the maintenance welder. They can be torch cut to any dimension and are small enough to fit around most contoured surfaces.• Economical – Cost less and last longer and can be applied up to 15 times faster than conventional hardfacing
• Wear Resistant – Through hardened to 62Rc and will outlast conventional hardfacing by up to ten times
• Less Distortion – Much less welding required for application
• 1/4" and 3/8" plates designed to resist moderate impact
• Hardness: 62 Rc
• ASTM G65 Abrasion Test: 96.35 mm³ vol. loss
Technical Specifications
| Item#: | EG09904500 |
|---|---|
| Type | Hard Steel |
| Total Thickness | 1/4 " |
| Plate Width | 4 " |
| Plate Length | 5 " |
| Size | 4"x 5" x 1/4 " |
| Bulk Hardness | 62 |
| UNSPSC #: | 30102201 |
| TAA Compliant: | Yes |
| Weight: | 1.34 lb |
Product Restrictions
