Wear Resistant Plates Torchable Hardness 62Rc
(Pack of
1)
SKU:EG09905700 Item#: EG09905700
Wearplates for maintenance. Plates are smaller wearplates designed for use by the maintenance welder. They can be torch cut to any dimension and are small enough to fit around most contoured surfaces.
• Economical – Cost less and last longer and can be applied up to 15 times faster than conventional hardfacing
• Wear Resistant – Through hardened to 62Rc and will outlast conventional hardfacing by up to ten times
• Less Distortion – Much less welding required for application
• 1/4" and 3/8" plates designed to resist moderate impact
• Hardness: 62 Rc
• ASTM G65 Abrasion Test: 96.35 mm³ vol. loss
Frequently Bought Together
Front Fender Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Front Bumper Specialty Nut Steel M4.2-1.41
Couldn't load pickup availability
Front Fender Liner Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
1/2 on 1/2 Dimension I Double Pass Overlay
Couldn't load pickup availability
1/4 on 3/8 Dimension I Single Pass Overlay
Couldn't load pickup availability
3/8 on 3/8 Dimension I Double Pass Overlay
Couldn't load pickup availability
Cap Whip-Lead Connector #4 to #1
Couldn't load pickup availability
Oxygen Safety Cap Heavy Duty
Couldn't load pickup availability
1/2 on 1/2 Dimension I Double Pass Overlay
Couldn't load pickup availability
Product Description
Wearplates for maintenance. Plates are smaller wearplates designed for use by the maintenance welder. They can be torch cut to any dimension and are small enough to fit around most contoured surfaces.• Economical – Cost less and last longer and can be applied up to 15 times faster than conventional hardfacing
• Wear Resistant – Through hardened to 62Rc and will outlast conventional hardfacing by up to ten times
• Less Distortion – Much less welding required for application
• 1/4" and 3/8" plates designed to resist moderate impact
• Hardness: 62 Rc
• ASTM G65 Abrasion Test: 96.35 mm³ vol. loss
Technical Specifications
| Item#: | EG09905700 |
|---|---|
| Type | Hard Steel |
| Total Thickness | 1/4 " |
| Plate Width | 5 " |
| Plate Length | 7 " |
| Size | 5"x 7" x 1/4 " |
| Bulk Hardness | 62 |
| UNSPSC #: | 30102201 |
| TAA Compliant: | Yes |
| Weight: | 2.4 lb |
