Wedge Type Anchor Bolt Steel 3/4 x 4"
(Pack of
2.0)
• Zinc-plated, rust-resistant steel
• Meets the following specifications: OSHA Section 1910.212 (b), I.C.B.O. No. 1821, GSA FFS-325 and ASTM B633
• Designed for installation in concrete block, brick and stone
1. Drill hole to depth equal to length of Wej-It® Anchor Bolt. Clean hole with compressed air and wire brush.
2. Drive Wej-It® Anchor Bolt into drilled hole through fixture until washer is flush with fixture.
3. Tighten the nut three to five turns past the hand-tight position.
Frequently Bought Together
Hollow Wall Screw Anchor Assortment 196Pcs
Couldn't load pickup availability
Wallboard Anchor Assortment 1125Pcs
Couldn't load pickup availability
Light-Medium Duty Anchor Assortment 240Pcs
Couldn't load pickup availability
Hex Nut Grade 5 Steel 3/8-16
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M8-1.25 x 12mm
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M6-1 x 45mm
Couldn't load pickup availability
Shield Push-Type Retainer with Metal Insert
Couldn't load pickup availability
Bumper Clip Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor Steel 3/4 x 7"
Couldn't load pickup availability
Wedge Type Anchor Bolt Steel 1/2 x 2-3/4"
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor SS 3/8 x 2-3/4"
Couldn't load pickup availability
Product Description
• Zinc-plated, rust-resistant steel• Meets the following specifications: OSHA Section 1910.212 (b), I.C.B.O. No. 1821, GSA FFS-325 and ASTM B633
• Designed for installation in concrete block, brick and stone
1. Drill hole to depth equal to length of Wej-It® Anchor Bolt. Clean hole with compressed air and wire brush.
2. Drive Wej-It® Anchor Bolt into drilled hole through fixture until washer is flush with fixture.
3. Tighten the nut three to five turns past the hand-tight position.
Technical Specifications
| Item#: | 92864 |
|---|---|
| Diameter | 3/4 " |
| Length | 4 " |
| Thread Length | 1-1/2 " |
| Drill Size | 3/4 " |
| Material | Carbon Steel |
| Finish | Bright Zinc |
| Type | Wedge Anchor |
| Size | 3/4X4 " |
| Minimum Embedment | 3 " |
| UNSPSC #: | 31162101 |
| TAA Compliant: | No |
| Weight: | 1.14 lb |
Product Restrictions
