Wedge Type Anchor Bolt Steel 3/4 x 5"
(Pack of
2.0)
• Zinc-plated, rust-resistant steel
• Meets the following specifications: OSHA Section 1910.212 (b), I.C.B.O. No. 1821, GSA FFS-325 and ASTM B633
• Designed for installation in concrete block, brick and stone
1. Drill hole to depth equal to length of Wej-It® Anchor Bolt. Clean hole with compressed air and wire brush.
2. Drive Wej-It® Anchor Bolt into drilled hole through fixture until washer is flush with fixture.
3. Tighten the nut three to five turns past the hand-tight position.
Frequently Bought Together
Toggle Bolt Anchor Assortment 70Pcs
Couldn't load pickup availability
Conical Screw Anchor Kit Plastic 301Pcs
Couldn't load pickup availability
Conical Screw Anchor Kit Plastic 401Pcs
Couldn't load pickup availability
Open End Rivet Dome Head Aluminum 3/16"
Couldn't load pickup availability
Open End Rivet Dome Head Aluminum 5/32"
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M8-1.25 x 25mm
Couldn't load pickup availability
Fender Bumper Shield Retainer 11/16"
Couldn't load pickup availability
Fender Apron Drive Rivet 8mm Hole
Couldn't load pickup availability
Inner Fender Shield Attaching Clip Nylon Black
Couldn't load pickup availability
Wedge Type Anchor Bolt Steel 1/4 x 2-3/4"
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor Steel 1/2 x 5-1/2"
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor Steel 3/8 x 3-3/4"
Couldn't load pickup availability
Product Description
• Zinc-plated, rust-resistant steel• Meets the following specifications: OSHA Section 1910.212 (b), I.C.B.O. No. 1821, GSA FFS-325 and ASTM B633
• Designed for installation in concrete block, brick and stone
1. Drill hole to depth equal to length of Wej-It® Anchor Bolt. Clean hole with compressed air and wire brush.
2. Drive Wej-It® Anchor Bolt into drilled hole through fixture until washer is flush with fixture.
3. Tighten the nut three to five turns past the hand-tight position.
Technical Specifications
| Item#: | 92865 |
|---|---|
| Diameter | 3/4 " |
| Length | 5 " |
| Thread Length | 1-1/2 " |
| Drill Size | 3/4 " |
| Material | Carbon Steel |
| Finish | Bright Zinc |
| Type | Wedge Anchor |
| Size | 3/4X5 " |
| Minimum Embedment | 3 " |
| UNSPSC #: | 31162101 |
| TAA Compliant: | No |
| Weight: | 1.43 lb |
Product Restrictions
