Wedge Type Stud Bolt Anchor, Steel, Zinc Finish, 3/8 x 2-1/4"
(Pack of
25)
SKU:84028 Item#: 84028
• Available in zinc-plated steel and stainless steel
1. Drill hole of proper diameter in concrete. Drilled hole can be any depth beyond minimum recommended depth.
2. Drive Wedge Anchor into drilled hole through fixture until nut is flush with fixture.
3. Tighten nut until wrench resistance is felt (approximately three to four full turns past the hand-tight position). Anchoring is now complete.
Frequently Bought Together
Masonry Sleeve Anchor Steel 1/4 x 2-1/4"
$0.00
Couldn't load pickup availability
Masonry Anchor Hex Washer Head Steel 1/4 x 1"
$0.00
Couldn't load pickup availability
Masonry Anchor TORX® Flat Head Steel 1/4 x 1-3/4"
$0.00
Couldn't load pickup availability
Sheet Metal Screw Phillips Truss Head #14 x 3/4"
$0.00
Couldn't load pickup availability
Diamond Grip II Threaded Insert M6-1
$0.00
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 1/4"
$0.00
Couldn't load pickup availability
Molding Clip with Sealer Nylon White 11.5 x 21
$0.00
Couldn't load pickup availability
Wheel Opening Drive Rivet Aluminum 5/32"
$0.00
Couldn't load pickup availability
Bumper Fascia Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Wedge Type Anchor Bolt Steel 3/4 x 4"
$0.00
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor Steel 5/8 x 8-1/2"
$0.00
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor SS 1/4 x 2-1/4"
$0.00
Couldn't load pickup availability
Product Description
• Available in zinc-plated steel and stainless steel1. Drill hole of proper diameter in concrete. Drilled hole can be any depth beyond minimum recommended depth.
2. Drive Wedge Anchor into drilled hole through fixture until nut is flush with fixture.
3. Tighten nut until wrench resistance is felt (approximately three to four full turns past the hand-tight position). Anchoring is now complete.
Technical Specifications
| Item#: | 84028 |
|---|---|
| Diameter | 3/8 " |
| Length | 2-1/4 " |
| Thread Length | 1 " |
| Drill Size | 3/8 " |
| Material | Carbon Steel |
| Finish | Bright Zinc |
| Type | Wedge Anchor |
| Proof Test Load | 2,420 lb |
| Length Identification Code | B |
| Size | 3/8X2-1/4 " |
| Minimum Embedment | 1-3/4 " |
| UNSPSC #: | 31162101 |
| TAA Compliant: | No |
| Weight: | 2.08 lb |
