Wing-Type Toggle Bolt Anchor, Mushroom, Steel, Zinc Finish, 5/8" Drill Size, 1/4-20 x 4"
(Pack of
25)
SKU:25150 Item#: 25150
Toggle Bolt Assemblies
• Better spring action and more thread engagement
1. Insert bolt through item to be fastened, thread on wings, then fold wings completely back and insert through hole until wings spring open.
2. Pull back on assembly to hold wings against inside wall – this prevents the wings from spinning while tightening bolt. Tighten bolt firmly with screwdriver.
Frequently Bought Together
Masonry Anchor Phillips Head #14-10 x 2-1/4"
$0.00
Couldn't load pickup availability
Lag Screw Shield Anchor Long Style 3/8 x 2-1/2"
$0.00
Couldn't load pickup availability
Double Expansion Shield Anchor Alloy Steel 5/8"
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 20mm
$0.00
Couldn't load pickup availability
Open End Rivet Dome Head Aluminum 1/8"
$0.00
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 3/8-16
$0.00
Couldn't load pickup availability
Phillips Truss Head Sheet Metal Screw Steel 15mm
$0.00
Couldn't load pickup availability
Front Rear Bumper Specialty Rivet 3.2mm
$0.00
Couldn't load pickup availability
Molding Clip with Sealer Nylon White 11.5 x 21
$0.00
Couldn't load pickup availability
Wing-Type Toggle Bolt Anchor Steel 1/4-20 x 5"
$0.00
Couldn't load pickup availability
Hollow Wall Screw Anchor Steel Short Style 1/8"
$0.00
Couldn't load pickup availability
Wing-Type Toggle Bolt Anchor Steel 1/4-20 x 6"
$0.00
Couldn't load pickup availability
Product Description
Toggle Bolt Assemblies• Better spring action and more thread engagement
1. Insert bolt through item to be fastened, thread on wings, then fold wings completely back and insert through hole until wings spring open.
2. Pull back on assembly to hold wings against inside wall – this prevents the wings from spinning while tightening bolt. Tighten bolt firmly with screwdriver.
Technical Specifications
| Item#: | 25150 |
|---|---|
| Length | 4 " |
| Type | Wall Anchor |
| Size | 1/4X4 " |
| Diameter | 1/4 " |
| Material | Steel |
| Head Style | Mushroom |
| Finish | Zinc |
| Thread | Coarse |
| Thread Pitch | 20 |
| Drill Size | 5/8 " |
| Anchor Size | 1/4 x 4 " |
| Tensile Proof Test Load In Concrete | 600 lb |
| Shear Proof Test Load | 600 lb |
| Bolt Size | 1/4-20 x 4 " |
| UNSPSC #: | 31162103 |
| TAA Compliant: | No |
| Weight: | 1.78 lb |
