Wing-Type Toggle Bolt Anchor, Round Head, Steel, Zinc Finish, 5/8" Drill Size, 1/4-20 x 6"
(Pack of
25)
SKU:25152 Item#: 25152
Toggle Bolt Assemblies
• Better spring action and more thread engagement
1. Insert bolt through item to be fastened, thread on wings, then fold wings completely back and insert through hole until wings spring open.
2. Pull back on assembly to hold wings against inside wall – this prevents the wings from spinning while tightening bolt. Tighten bolt firmly with screwdriver.
Frequently Bought Together
E-Z Anchor Kit Steel 41Pcs
Couldn't load pickup availability
Conical Screw Anchor Kit Plastic 201Pcs
Couldn't load pickup availability
Drill 'N Drive Masonry Anchor Kit 102Pcs
Couldn't load pickup availability
Open End Rivet Dome Head Aluminum 3/16"
Couldn't load pickup availability
DIN 125A Flat Washer Grade 140 HV M6
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 20mm
Couldn't load pickup availability
Woven Polyester Electrical Tape 19mm x 25m
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
Couldn't load pickup availability
Bumper Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Hollow Wall Screw Anchor Steel Short Style #6-32
Couldn't load pickup availability
Wing-Type Toggle Bolt Anchor Steel #6-32 x 3"
Couldn't load pickup availability
Toggle Bolt Anchor Wing #6-32
Couldn't load pickup availability
Product Description
Toggle Bolt Assemblies• Better spring action and more thread engagement
1. Insert bolt through item to be fastened, thread on wings, then fold wings completely back and insert through hole until wings spring open.
2. Pull back on assembly to hold wings against inside wall – this prevents the wings from spinning while tightening bolt. Tighten bolt firmly with screwdriver.
Technical Specifications
| Item#: | 25152 |
|---|---|
| Length | 6 " |
| Type | Wall Anchor |
| Size | 1/4X6 " |
| Diameter | 1/4 " |
| Material | Steel |
| Head Style | Round |
| Finish | Zinc |
| Thread | Coarse |
| Thread Pitch | 20 |
| Drill Size | 5/8 " |
| Anchor Size | 1/4 x 6 " |
| Tensile Proof Test Load In Concrete | 600 lb |
| Shear Proof Test Load | 600 lb |
| Bolt Size | 1/4-20 x 6 " |
| UNSPSC #: | 31162103 |
| TAA Compliant: | No |
| Weight: | 2.3 lb |
