22 Cast Iron Bare Brazing Rod 3/16"
(Pack of
5)
A selection of brazing alloys for joining cast iron and brazing sheet metal.
Superior Advantages
• Solid, dense deposits that can be machined
• Free-flowing for thin lapping and butted metal joining
• No base metal dilution making tough cast iron repairs possible
“True Color Match” Cast Iron
Tensile Strength: 53,000 PSIHardness: Rc 18-20Bonding Temperature: 2,300°F (1,260°C)Recommended Flux: F22
Typical Applications
• Sheet metal and auto body repairs
• Engine heads and blocks
• Piping, plumbing and pumps
• Gears, sprockets and pulleys
Usage ProcedureUse neutral flame and preheat broad area along braze line. Concentrate flame on rod end and allow weld drops to flow on joint. Continue heating until it wets out and continue process. If a second layer is required, hold torch parallel to the work and apply drop-by-drop. When working with cast iron, avoid localized heating and cover finished braze to retard cooling process.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
201 The Elite Blue Flux Coated Brazing Alloy 1/16
Couldn't load pickup availability
54 Aluminum Flux Cored Brazing Rod 1/8"
Couldn't load pickup availability
30 Copper and Steel Flux Coated Brazing Rod 3/32"
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability
Radiator Grille Nut M4.2-1.41
Couldn't load pickup availability
Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability
30 Copper and Steel Flux Coated Brazing Rod 3/32"
Couldn't load pickup availability
30 Copper and Steel Flux Coated Brazing Rod 1/8"
Couldn't load pickup availability
23 Copper and Steel Flux Coated Brazing Rod 3/32"
Couldn't load pickup availability
Heat Stick 1050F Degrees
Couldn't load pickup availability
Wear Plates Used By Maintenance Welder 1/4X4X5
Couldn't load pickup availability
Wear Plates Used By Maintenance Welder 3/16X3X4
Couldn't load pickup availability
Product Description
A selection of brazing alloys for joining cast iron and brazing sheet metal.Superior Advantages
• Solid, dense deposits that can be machined
• Free-flowing for thin lapping and butted metal joining
• No base metal dilution making tough cast iron repairs possible
“True Color Match” Cast Iron
Tensile Strength: 53,000 PSIHardness: Rc 18-20Bonding Temperature: 2,300°F (1,260°C)Recommended Flux: F22
Typical Applications
• Sheet metal and auto body repairs
• Engine heads and blocks
• Piping, plumbing and pumps
• Gears, sprockets and pulleys
Usage ProcedureUse neutral flame and preheat broad area along braze line. Concentrate flame on rod end and allow weld drops to flow on joint. Continue heating until it wets out and continue process. If a second layer is required, hold torch parallel to the work and apply drop-by-drop. When working with cast iron, avoid localized heating and cover finished braze to retard cooling process.
Technical Specifications
| Item#: | CW3062 |
|---|---|
| Welding Process | Brazing |
| Type | Bare |
| Diameter | 3/16 " |
| Length | 18 " |
| Tensile Strength | 53,000 PSI |
| Melting Temperature | 1560-2000 °F |
| Color | Gray |
| Base Metal | Cast Iron |
| Recommended Flux | F22 |
| UNSPSC #: | 23271804 |
| TAA Compliant: | No |
| Weight: | 5.0 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
