54 Aluminum Flux Cored Brazing Rod 1/8"
(Pack of
2)
Transform your aluminum welding projects with the 54 Aluminum Flux Cored Brazing Rod, engineered specifically for joining all types of aluminum with professional-grade results. This flux-cored rod eliminates the guesswork from your welding process, delivering consistent, strong joints with 34,500 PSI tensile strength at an application temperature of 1,110°F. Whether you're working on aluminum frames, tubing systems, ornamental pieces, or cast aluminum repairs, this versatile rod applies easily and creates durable bonds that stand up to demanding conditions. Built for both joining and buildup applications, it streamlines your workflow while ensuring every weld meets the highest standards of strength and reliability.
• Products for joining and buildup
• Easy to apply
• Flux-cored for all types of aluminum
Tensile Strength: 34,500 PSIApplication Temperature: 1,110°F (599°C)Recommended Flux: F56 (if needed)
Typical Applications
• Aluminum frames
• Tubing and piping
• Ornamental aluminum
• Cast aluminum
Usage ProcedureBevel heavy sections to allow 100% weld metal penetration. Broadly heat area to be brazed with a large, soft and slightly carburizing flame to about 1,050°F (566°C). Warm the end of the rod and rub on base metal until flux flows freely. 54C will then begin to wet the base metal. Deposit the 54C to fill the joint. Flux residue may be removed with warm water and brush. If additional flux is needed, use F56 flux.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
52 Aluminum/Zinc Bare Brazing Rod 1/8"
Couldn't load pickup availability
53 Pot Metal Bare Brazing Rod 1/16"
Couldn't load pickup availability
53 Pot Metal Bare Brazing Rod 1/8"
Couldn't load pickup availability
44 Silver Bare Brazing Rod 3/32"
Couldn't load pickup availability
51 High Silver Flux Coated Brazing Rod 1/16"
Couldn't load pickup availability
23 Copper and Steel Flux Coated Brazing Rod 1/8"
Couldn't load pickup availability
Front Fender Liner Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
Couldn't load pickup availability
Push-Type Retainer Nylon 16 x 19mm
Couldn't load pickup availability
1/4 on 1/4 Dimension I Double Pass Overlay
Couldn't load pickup availability
3/16 on 3/16 Dimension I Single Pass Overlay
Couldn't load pickup availability
201 Rectangular Wear Disc Plate Kit
Couldn't load pickup availability
Product Description
Transform your aluminum welding projects with the 54 Aluminum Flux Cored Brazing Rod, engineered specifically for joining all types of aluminum with professional-grade results. This flux-cored rod eliminates the guesswork from your welding process, delivering consistent, strong joints with 34,500 PSI tensile strength at an application temperature of 1,110°F. Whether you're working on aluminum frames, tubing systems, ornamental pieces, or cast aluminum repairs, this versatile rod applies easily and creates durable bonds that stand up to demanding conditions. Built for both joining and buildup applications, it streamlines your workflow while ensuring every weld meets the highest standards of strength and reliability.• Products for joining and buildup
• Easy to apply
• Flux-cored for all types of aluminum
Tensile Strength: 34,500 PSIApplication Temperature: 1,110°F (599°C)Recommended Flux: F56 (if needed)
Typical Applications
• Aluminum frames
• Tubing and piping
• Ornamental aluminum
• Cast aluminum
Usage ProcedureBevel heavy sections to allow 100% weld metal penetration. Broadly heat area to be brazed with a large, soft and slightly carburizing flame to about 1,050°F (566°C). Warm the end of the rod and rub on base metal until flux flows freely. 54C will then begin to wet the base metal. Deposit the 54C to fill the joint. Flux residue may be removed with warm water and brush. If additional flux is needed, use F56 flux.
Technical Specifications
| Item#: | CW1857 |
|---|---|
| Welding Process | Brazing |
| Type | Flux Cored |
| Diameter | 1/8 " |
| Length | 32 " |
| Tensile Strength | 34,500 PSI |
| Melting Temperature | 1560-2000 °F |
| Base Metal | Aluminum |
| Recommended Flux | F56 |
| UNSPSC #: | 23271804 |
| TAA Compliant: | Yes |
| Weight: | 2.5 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
