3/8"-18 NPT Pipe Tap, Drill Size 37/64", HSS
(Pack of
1)
SKU:PM08230704 Item#: PM08230704
High Speed Steel (HSS) Taps last longer than carbon steel taps and cut a broader variety of metals, including: carbon steel, low-alloy steel, 300-series stainless steel, aluminum, copper, brass, bronze and more. Using tapping fluid is always recommended.
• Molybdenum Rich Tool Steel - Delivers longer life and stronger torsion strength to resist breaking
• Spiral Point - Applied to all sizes of PLUG taps to push cuttings ahead of the tap
• Precision Ground Threads - ASME B94.9, Thread Class Limit: H2 (#6, 8, 10), H3 (#12 and above)
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Abrasive Bristle Wire Belt Steel 23mm
$0.00
Couldn't load pickup availability
Scotch-Brite Roloc Bristle Disc 2"
$0.00
Couldn't load pickup availability
Polymer Wheel Rubber Eraser 30mm
$0.00
Couldn't load pickup availability
HSS Pipe Hand Tap 2 to 11-1/2
$0.00
Couldn't load pickup availability
Cryotap 3/8"-18 NPT Hand Tap
$0.00
Couldn't load pickup availability
HSS Pipe Hand Tap 3/8-18
$0.00
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
$0.00
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Fender Bumper Shield Retainer 11/16"
$0.00
Couldn't load pickup availability
Cryo-Drap 7/16"-14 Drill & Tap Combo, 135o Split Point, W/Flats
$0.00
Couldn't load pickup availability
4-Flute HSS Bottoming Hand Tap M14 x 2
$0.00
Couldn't load pickup availability
4-Flute HSS Bottoming Hand Tap M4 x 0.7
$0.00
Couldn't load pickup availability
Small Index-Tend Pry Bar
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
$0.00
Couldn't load pickup availability
1/4" - 3/4" Cryonitride Spiral Fluted Step Drill - 3/8" Shank
$0.00
Couldn't load pickup availability
Acid Brush 3/8 x 5-3/4"
$0.00
Couldn't load pickup availability
Hinge Pin and Bushing Kit 4 Items 7Pcs
$0.00
Couldn't load pickup availability
Bumper and Lower Deflector Specialty Rivet 4.8mm
$0.00
Couldn't load pickup availability
Acid Brush 3/8 x 5-3/4"
$0.00
Couldn't load pickup availability
Hinge Pin and Bushing Kit 4 Items 7Pcs
$0.00
Couldn't load pickup availability
Bumper and Lower Deflector Specialty Rivet 4.8mm
$0.00
Couldn't load pickup availability
Product Description
High Speed Steel (HSS) Taps last longer than carbon steel taps and cut a broader variety of metals, including: carbon steel, low-alloy steel, 300-series stainless steel, aluminum, copper, brass, bronze and more. Using tapping fluid is always recommended.• Molybdenum Rich Tool Steel - Delivers longer life and stronger torsion strength to resist breaking
• Spiral Point - Applied to all sizes of PLUG taps to push cuttings ahead of the tap
• Precision Ground Threads - ASME B94.9, Thread Class Limit: H2 (#6, 8, 10), H3 (#12 and above)
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | PM08230704 |
|---|---|
| Material | High Speed Steel |
| Diameter | 3/8 " |
| Pitch | 18 |
| Flutes | 6 |
| Thread Length | 1-1/16 " |
| Recommended Drill Size | 37/64 " |
| UNSPSC #: | 23241615 |
| TAA Compliant: | No |
| Weight: | 0.13 lb |
