Aligning Reamer, High Speed Steel, Gold Finish, Straight Shank, Right Hand Spiral Flute, 5-1/4" Flute Length, 1 x 6-3/4"
(Pack of
1)
SKU:97625 Item#: 97625
• Enter holes half their nominal diameter
• Special gold finish minimizes friction
• Three large flats for solid chucking
• Right-hand cut with left-hand flute to minimize pushback or grabbing
• 1/2" shank
NOTE: Always use slow turning drill motors of 4.5A or higher.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Aligning Reamer HSS 1/2"
$0.00
Couldn't load pickup availability
Aligning Reamer HSS 7/16"
$0.00
Couldn't load pickup availability
Aligning Reamer HSS 1-1/16"
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 2-13/16(M8)
$0.00
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 1/8"
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 1/4" (M6)
$0.00
Couldn't load pickup availability
Aligning Reamer HSS 5/8"
$0.00
Couldn't load pickup availability
Aligning Reamer HSS 1/2"
$0.00
Couldn't load pickup availability
Aligning Reamer HSS 7/16"
$0.00
Couldn't load pickup availability
Rear Bumper Cover Retainer Plastic 18mm
$0.00
Couldn't load pickup availability
Bumper and Wheel Well Liner Push-Type Retainer
$0.00
Couldn't load pickup availability
Fender Apron Drive Rivet 8mm Hole
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 2-13/16(M8)
$0.00
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 1/8"
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 1/4" (M6)
$0.00
Couldn't load pickup availability
Product Description
• Enter holes half their nominal diameter• Special gold finish minimizes friction
• Three large flats for solid chucking
• Right-hand cut with left-hand flute to minimize pushback or grabbing
• 1/2" shank
NOTE: Always use slow turning drill motors of 4.5A or higher.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 97625 |
|---|---|
| Type | Aligning |
| Material | High Speed Steel |
| Diameter | 1 " |
| Decimal Equivalent | 1.0000 " |
| Shank Type | Straight |
| Finish | Gold |
| Shank Size | 1/2 |
| Flats | 3 |
| Flute Type | Right Hand Spiral |
| Flute Length | 5-1/4 " |
| Pilot Drill Diameter | 1/2 |
| Material Thickness | 2-1/4 |
| Overall Length | 6-3/4 " |
| UNSPSC #: | 23241611 |
| TAA Compliant: | Yes |
| Weight: | 0.86 lb |
