Fast-Lok® Plate Lfting System
(Pack of
1.0)
The Fast-Lok Pin is designed for use in applications where quick and easy removal is desired. The user is reminded to insure pin is properly installed prior to applying load. NOTE: Minimum ultimate load is 6 times the working load limit. Bolt type anchor shackles supplied with thin head bolt & nut with cotter pin. Meets Federal Specification RR-C 271D, Type IVA, Grade A, Class 3.
• Use electrode AWS class E7018 per MIL-E-22200/1
• For MIG welding use ER70S-2 or ER70S-6 .035 diameter wire
• Center Fast-Lok Plate with 1/16" clearance on each side
• Align with top surface of road plate and tack weld in place to start
• Preheat the Fast-Lok Plate and roadplate in an area approximately 6" radius around the roadplate cutout hole to 200°-300° F
• Preheat temperature must be held during the welding process. A propane torch could be used for this
• Use fresh electrodes because old electrodes may have absorbed humidity into the flux which could cause cracking
• Weld Fast-Lok Plate to road plate from top side
• Cool gradually to prevent cracking
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Eyebolt, With Nut, Galvanized, 3/4" x 12"
Couldn't load pickup availability
Eye Bolt with Nut 1/4" x 2" Long
Couldn't load pickup availability
Welded Eye Bolt with Nut, Stainless Steel, 1/2" - 13, 1,800 lb WLL
Couldn't load pickup availability
Hoist Ring, Heavy Duty®, 5,000 lb Load Limit
Couldn't load pickup availability
Universal Lift Ring, 1/2" to 3/4", 2,500 to 6,000 lb Load Limit
Couldn't load pickup availability
Hoist Ring, Heavy Duty®, 4,000 lb Load Limit
Couldn't load pickup availability
Wire Rope, Steel, Bare, 7x19, 5/16", 9,800 lbs Breaking Strength
Couldn't load pickup availability
Wire Rope, Steel, Bare, 7x19, 3/16", 4,200 lbs Breaking Strength
Couldn't load pickup availability
Wire Rope, Steel, Vinyl Coated, 7x7, 1/16", 480 lbs Breaking Strength
Couldn't load pickup availability
Engine Under Cover Drive Rivet Plastic 7mm Hole
Couldn't load pickup availability
Bumper Fascia General Purpose Split Rivet 3/16"
Couldn't load pickup availability
Woven Polyester Electrical Tape 19mm x 25m
Couldn't load pickup availability
Product Description
The Fast-Lok Pin is designed for use in applications where quick and easy removal is desired. The user is reminded to insure pin is properly installed prior to applying load. NOTE: Minimum ultimate load is 6 times the working load limit. Bolt type anchor shackles supplied with thin head bolt & nut with cotter pin. Meets Federal Specification RR-C 271D, Type IVA, Grade A, Class 3.• Use electrode AWS class E7018 per MIL-E-22200/1
• For MIG welding use ER70S-2 or ER70S-6 .035 diameter wire
• Center Fast-Lok Plate with 1/16" clearance on each side
• Align with top surface of road plate and tack weld in place to start
• Preheat the Fast-Lok Plate and roadplate in an area approximately 6" radius around the roadplate cutout hole to 200°-300° F
• Preheat temperature must be held during the welding process. A propane torch could be used for this
• Use fresh electrodes because old electrodes may have absorbed humidity into the flux which could cause cracking
• Weld Fast-Lok Plate to road plate from top side
• Cool gradually to prevent cracking
Technical Specifications
| Item#: | 1423422 |
|---|---|
| Type | Fast-Lok |
| Working Load Limit | 10,000 lb |
| Swivel | 0 ° |
| Pivot | 180 ° |
| UNSPSC #: | 24101602 |
| TAA Compliant: | Yes |
| Weight: | 0.0 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
