Combination Drill-Tap, M1 High Speed Steel, 118° Split Point, M7-1, 0.69" Tap Length, 3.69" Overall Length
(Pack of
1)
• Eliminates the need for using a twist drill and a separate tap to achieve a tapped hole
• 118° spiral point
• Three positive driving flats on the shank
• Neck is reduced below minor diameter for added clearance
• Made of M1 high-speed steel
• Made in USA
• Ideal for cordless drills; can be used in hand-held or stationary drills for tapping through holes
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Cryo-Drap 7/16"-20 Drill & Tap Combo, 135o Split Point, W/Flats
Couldn't load pickup availability
HSS Combination Drill-Tap M5 x 0.8
Couldn't load pickup availability
HSS Combination Drill-Tap 1/2-20
Couldn't load pickup availability
Scotch-Brite Roloc Bristle Disc 2"
Couldn't load pickup availability
Reinforced Mini Cut-Off Wheel 4"
Couldn't load pickup availability
Twist-On Abrasive Disc 3"
Couldn't load pickup availability
Front License Plate to Bumper Cover Split Rivet
Couldn't load pickup availability
Front Bumper and Radiator Support Drive Rivet
Couldn't load pickup availability
Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
3-Flute HSS Hand Tap 10-24
Couldn't load pickup availability
Cryotap M12 x 1.75 Metric Plug Hand Tap
Couldn't load pickup availability
Cryotap 5/16"-18 Tri-Pak
Couldn't load pickup availability
E-Z Kut Reinforced Abrasive Wheel 3"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 6.5mm
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 5/32"
Couldn't load pickup availability
Product Description
• Eliminates the need for using a twist drill and a separate tap to achieve a tapped hole• 118° spiral point
• Three positive driving flats on the shank
• Neck is reduced below minor diameter for added clearance
• Made of M1 high-speed steel
• Made in USA
• Ideal for cordless drills; can be used in hand-held or stationary drills for tapping through holes
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 27382 |
|---|---|
| Type | Combination Drill Tap |
| Point | 118° Split |
| Diameter | M7 |
| Pitch | 1.0 mm |
| Tap Length | 0.6900 " |
| Material Thickness | 9/16 " |
| Material | HSS |
| Overall Length | 3.69 " |
| UNSPSC #: | 23241615 |
| TAA Compliant: | Yes |
| Weight: | 0.04 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
