Maintenance Engineered Hacksaw Blade, Bimetal Construction, 12" Length, 26-32TPI
(Pack of
10)
SKU:51226M01 Item#: 51226M01
• Made in USA Variable Pitch
• Teeth vary in size, spacing, gullet depth and number of teeth per inch along the whole length of the blade
• Allows each tooth to enter the workpiece at a different cutting angle than the tooth before it, cutting into the workpiece underneath the cut made by the previous tooth, which makes for better chip formation. This allows you to cut faster and results in a smooth-cut finish
• Less friction results in less heat buildup, particularly when cutting materials such as stainless steel that tend to work-harden easily
• Each variable pitch blade size is able to cut a wider range of thicknesses, materials and shapes than straight pitch blades – reducing time required for blade changesBi-Metal Construction
• A matrix alloy tool steel cutting edge is electronically welded to an alloy spring steel back
• Cuts tough materials up to Rc 45, yet remains shatterproof
• Can be tensioned to 30,000 PSI in a Hardflex® frame for greater performance
• Withstands heavy feed pressures, side pressures and shocks without stripping teeth
• Resists fatigue due to high friction cutting temperatures
• Teeth stay sharper longerWavy Set
• Groups of teeth are offset to the left and right throughout the blade
• Less likely to strip than raker set teeth, because the set extends from below the gullets
• On thin wall material, waviness increases the contact area, giving better accuracy
• Better choice when the workpiece thickness varies, or for thin materials which may catch or bind teeth
• The angle of each tooth changes gradually, thereby increasing the contact area and distributing the load
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
Catalog page#: 4-25
Frequently Bought Together
Small General Purpose Bimetal Hole Saw Kit 9Pcs
$0.00
Couldn't load pickup availability
Double End Drill Bit 1/8"
$0.00
Couldn't load pickup availability
Air Saw Blade 4" 24TPI
$0.00
Couldn't load pickup availability
Standard Bimetal Hacksaw Blade 12"
$0.00
Couldn't load pickup availability
18" Power Hacksaw Blade, 1-1/2" wide, 6 TPI
$0.00
Couldn't load pickup availability
Standard Bimetal Hacksaw Blade 12"
$0.00
Couldn't load pickup availability
Tapered Reciprocating Saw Blade 6"
$0.00
Couldn't load pickup availability
Reciprocating Saw Blade Kit 10Pcs
$0.00
Couldn't load pickup availability
Bimetal Reciprocating Blade 3-5/8"
$0.00
Couldn't load pickup availability
Rocker Door and Exterior Molding Retainer
$0.00
Couldn't load pickup availability
Phillips Truss Head Sheet Metal Screw Steel 15mm
$0.00
Couldn't load pickup availability
Fender Lining Screw Grommet Nylon #12
$0.00
Couldn't load pickup availability
Abrasive Hand Pad All Purpose 6 x 9"
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
$0.00
Couldn't load pickup availability
57Pc Torsion Impact Bit Master Set
$0.00
Couldn't load pickup availability
Product Description
• Made in USA Variable Pitch• Teeth vary in size, spacing, gullet depth and number of teeth per inch along the whole length of the blade
• Allows each tooth to enter the workpiece at a different cutting angle than the tooth before it, cutting into the workpiece underneath the cut made by the previous tooth, which makes for better chip formation. This allows you to cut faster and results in a smooth-cut finish
• Less friction results in less heat buildup, particularly when cutting materials such as stainless steel that tend to work-harden easily
• Each variable pitch blade size is able to cut a wider range of thicknesses, materials and shapes than straight pitch blades – reducing time required for blade changesBi-Metal Construction
• A matrix alloy tool steel cutting edge is electronically welded to an alloy spring steel back
• Cuts tough materials up to Rc 45, yet remains shatterproof
• Can be tensioned to 30,000 PSI in a Hardflex® frame for greater performance
• Withstands heavy feed pressures, side pressures and shocks without stripping teeth
• Resists fatigue due to high friction cutting temperatures
• Teeth stay sharper longerWavy Set
• Groups of teeth are offset to the left and right throughout the blade
• Less likely to strip than raker set teeth, because the set extends from below the gullets
• On thin wall material, waviness increases the contact area, giving better accuracy
• Better choice when the workpiece thickness varies, or for thin materials which may catch or bind teeth
• The angle of each tooth changes gradually, thereby increasing the contact area and distributing the load
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 51226M01 |
|---|---|
| Type | Standard |
| Length | 12 " |
| Teeth per Inch | 26-32 |
| Material Thickness | 1/16" and Thinner |
| UNSPSC #: | 27111559 |
| TAA Compliant: | Yes |
| Weight: | 0.45 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
