Pilotdrive Cryotap 1/2"-20 Tri-Pak, Pilotdrive, Plug, Bottoming Hand Taps
(Pack of
1)
SKU:DY80692905 Item#: DY80692905
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Treatment: Cryophase™ thermal cycle process
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Stemmed Knot-Type Wire Wheel 3"
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
$0.00
Couldn't load pickup availability
Twist-On Abrasive Disc 2"
$0.00
Couldn't load pickup availability
Cryotap M10 x 1.5 Metric Taper Hand Tap
$0.00
Couldn't load pickup availability
Cryotap M7 x 1.0 Metric Plug Hand Tap
$0.00
Couldn't load pickup availability
Pilotdrive Cryotap M10 x 1.5 Metric Tri-Pak, Taper, Plug, Bottoming
$0.00
Couldn't load pickup availability
Air Distributor Defroster Push-Type Retainer
$0.00
Couldn't load pickup availability
Fender Liner Screw Grommet Nylon M5.5
$0.00
Couldn't load pickup availability
Molding Clip with Sealer Nylon White 10 x 12mm
$0.00
Couldn't load pickup availability
3-Flute HSS Plug Hand Tap M2 x 0.4
$0.00
Couldn't load pickup availability
HSS Combination Drill-Tap M12
$0.00
Couldn't load pickup availability
HSS Left Hand Plug Tap 3/8-24
$0.00
Couldn't load pickup availability
2Pc Index-Tend Pry Bar Set
$0.00
Couldn't load pickup availability
Alu-Master 8-Way Torpedo Level
$0.00
Couldn't load pickup availability
18" Locking Smooth Operator Clamp
$0.00
Couldn't load pickup availability
Product Description
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Treatment: Cryophase™ thermal cycle process
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | DY80692905 |
|---|---|
| Type | Fractional |
| Style | Set |
| Material | CM-8™ Tool Steel |
| Diameter | 1/2 " |
| Pitch | 20 |
| Flutes | 4 |
| Thread Length | 3-3/8 " |
| H Limits | 4 |
| Recommended Drill Size | 29/64 " |
| Description | One each of Pilotdrive, Plug, and Bottoming Style Taps |
| UNSPSC #: | 23241615 |
| TAA Compliant: | No |
| Weight: | 0.36 lb |
