Pilotdrive Cryotap 7/8"-14 Starter Hand Tap
(Pack of
1)
SKU:DY80635028 Item#: DY80635028
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
Frequently Bought Together
Stemmed Knot-Type Wire Wheel 3"
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
$0.00
Couldn't load pickup availability
Twist-On Abrasive Disc 2"
$0.00
Couldn't load pickup availability
High-Strength Double Side Molding Tape 1/2" x 50'
$0.00
Couldn't load pickup availability
8Pc Metric Flare Nut Wrench Set
$0.00
Couldn't load pickup availability
Universal Socket Set, Deep, 1/2" Drive, 24pc
$0.00
Couldn't load pickup availability
Air Distributor Defroster Push-Type Retainer
$0.00
Couldn't load pickup availability
Fender Liner Screw Grommet Nylon M5.5
$0.00
Couldn't load pickup availability
Molding Clip with Sealer Nylon White 10 x 12mm
$0.00
Couldn't load pickup availability
Pilotdrive Cryotap 1"-8 Starter Hand Tap
$0.00
Couldn't load pickup availability
HSS Spiral Point Hand Tap 10-24
$0.00
Couldn't load pickup availability
HSS Spiral Point Hand Tap 5/16-18
$0.00
Couldn't load pickup availability
3-Flute HSS Plug Hand Tap M2 x 0.4
$0.00
Couldn't load pickup availability
HSS Combination Drill-Tap M12
$0.00
Couldn't load pickup availability
HSS Left Hand Plug Tap 3/8-24
$0.00
Couldn't load pickup availability
2Pc Index-Tend Pry Bar Set
$0.00
Couldn't load pickup availability
Alu-Master 8-Way Torpedo Level
$0.00
Couldn't load pickup availability
18" Locking Smooth Operator Clamp
$0.00
Couldn't load pickup availability
Product Description
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | DY80635028 |
|---|---|
| Type | Fractional |
| Diameter | 7/8 " |
| Pitch | 14 |
| Flutes | 4 |
| Thread Length | 2-7/32 " |
| H Limits | H4 |
| Overall Length | 4-11/16 " |
| Recommended Drill Size | 51/64 " |
| UNSPSC #: | 23241615 |
| TAA Compliant: | No |
| Weight: | 0.44 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
