Turnbuckle, Eye and Eye, Galvanized, 5/8" x 6"
(Pack of
1.0)
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Eye Bolts, Machinery, 5/16 x 1-1/8"
Couldn't load pickup availability
Shoulder Eyebolt, Machinery, Self-Colored, M27 x 3.0 x 70
Couldn't load pickup availability
Eyebolt, Machinery, Self-Colored, 1-1/2" x 3-1/2"
Couldn't load pickup availability
Shelf Bin, Yellow, 17-7/8" x 6-5/8" x 4"
Couldn't load pickup availability
ShelfMaxâ„¢ Bin, Blue, 11-5/8" x 6-5/8" x 6"
Couldn't load pickup availability
ShelfMaxâ„¢ Bin, Yellow, 17-5/8" x 4-1/8" x 6"
Couldn't load pickup availability
Bumper Clip Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Metric Indented Hex Head Bolt with 17mm Washer
Couldn't load pickup availability
Shield Push-Type Retainer with Metal Insert
Couldn't load pickup availability
Turnbuckle, Jaw and Jaw, Galvanized, 1/2" x 9"
Couldn't load pickup availability
Turnbuckle, Hook and Eye, Galvanized, 1/2" x 6"
Couldn't load pickup availability
Turnbuckle, Stainless Steel, Hook and Eye, 1/4" x 3" Take Up
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 1442227 |
|---|---|
| Type | Eye and Eye |
| Diameter | 5/8 " |
| Closed Length | 13-1/2 " |
| Working Load Limit | 3,500 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
