Turnbuckle, Jaw and Eye, Galvanized, 1/2" x 2"
(Pack of
1.0)
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class H
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Eye Bolt with Nut, Stainless Steel, 3/8"-16, 1,200 lb WLL
Couldn't load pickup availability
Turned Eyebolt, Zinc-Plated, 1/2" x 3"
Couldn't load pickup availability
Shoulder Eyebolt, Machinery, Self-Colored, M14 x 2.0 x 44.5
Couldn't load pickup availability
ShelfMaxâ„¢ Bin, Blue, 17-5/8" x 6-5/8" x 6"
Couldn't load pickup availability
AkroBin®, Yellow, 5-3/8" x 4-1/8" x 3"
Couldn't load pickup availability
Shelf Bin, Blue, 23-5/8" x 4-1/8" x 4"
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 2-13/16(M8)
Couldn't load pickup availability
Radiator Grille Nut M4.2-1.41
Couldn't load pickup availability
Turnbuckle, Eye and Eye, Galvanized, 3/4" x 12"
Couldn't load pickup availability
Turnbuckle, Stainless Steel, Eye and Eye, 3/8" x 6" Take Up
Couldn't load pickup availability
Turnbuckle, Stainless Steel, Eye and Eye, 3/8" x 6.00" Take Up
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class H
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 1442405 |
|---|---|
| Type | Jaw and Eye |
| Diameter | 1/2 " |
| Closed Length | 8-3/4 " |
| Working Load Limit | 2,200 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
