Turnbuckle, Hook and Eye, Galvanized, 5/16" x 4-1/2"
(Pack of
1)
SKU:1442447 Item#: 1442447
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class F
• Apply load to the center of end attachment eyes and bowl of hooks. Do not tip load hooks or side load eyes
CAUTION: Do not exceed working load limits.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Turned Eyebolt, Zinc-Plated, 3/8" x 1"
$0.00
Couldn't load pickup availability
Oversize Screw Pin Anchor Shackle, Stainless Steel, 3/8", 2,000 lb WLL
$0.00
Couldn't load pickup availability
Shoulder Eye Bolt with Nut, Stainless Steel, 3/8", 1,000 lb WLL
$0.00
Couldn't load pickup availability
Rope Ratchet 150 Lb Safe Load 1/4" x 10'
$0.00
Couldn't load pickup availability
Resin Utility Cart
$0.00
Couldn't load pickup availability
Turned Eyebolt, Zinc-Plated, 3/8" x 1"
$0.00
Couldn't load pickup availability
Bumper and Wheel Well Liner Push-Type Retainer
$0.00
Couldn't load pickup availability
Fender Apron Drive Rivet 8mm Hole
$0.00
Couldn't load pickup availability
Engine Under Cover Drive Rivet Plastic 7mm Hole
$0.00
Couldn't load pickup availability
Turnbuckle, Aluminum, Hook and Hook, 1/4" x 2.04" Take Up
$0.00
Couldn't load pickup availability
Turnbuckle, Stainless Steel, Jaw and Jaw, 3/8" x 6.00" Take Up
$0.00
Couldn't load pickup availability
Turnbuckle, Eye and Eye, Galvanized, 5/8" x 12"
$0.00
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class F
• Apply load to the center of end attachment eyes and bowl of hooks. Do not tip load hooks or side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 1442447 |
|---|---|
| Manufacturer Model #: | 01710 7 |
| Type | Hook and Eye |
| Diameter | 5/16 " |
| Closed Length | 9-1/4 " |
| Working Load Limit | 700 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
| Weight: | 0.39 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
