Turnbuckle, Jaw and Jaw, Galvanized, 1/2" x 2"
(Pack of
1)
SKU:1442063 Item#: 1442063
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class G
CAUTION: Do not exceed working load limits.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Turned Eyebolt, Zinc-Plated, 1/2" x 6"
Couldn't load pickup availability
Turned Eyebolt, Zinc-Plated, 3/16" x 1"
Couldn't load pickup availability
Shoulder Eyebolt, With Nut, Galvanized, 3/8" x 5"
Couldn't load pickup availability
Wire Rope, Steel, Bare, 7x7, 1/16", 480 lbs Breaking Strength
Couldn't load pickup availability
Wire Rope, Steel, Bare, 7x19, 3/8", 14,400 lbs Breaking Strength
Couldn't load pickup availability
Wire Rope, Steel, Vinyl Coated, 7x19, 3/16", 4,200 lbs Breaking Streng
Couldn't load pickup availability
Shield Push-Type Retainer with Metal Insert
Couldn't load pickup availability
Specialty Rivet with Plastic Cap Aluminum 3.2mm
Couldn't load pickup availability
Bumper Clip Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Turnbuckle, Stainless Steel, Eye and Eye, 1/4" x 4.00" Take Up
Couldn't load pickup availability
Turnbuckle, Stainless Steel, Hook and Eye, 3/8" x 6.00" Take Up
Couldn't load pickup availability
Turnbuckle, Jaw and Eye, Galvanized, 1" x 12"
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class G
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 1442063 |
|---|---|
| Manufacturer Model #: | 03070 0 |
| Type | Jaw and Jaw |
| Diameter | 1/2 " |
| Closed Length | 8-7/8 " |
| Working Load Limit | 2,200 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
