7-1/4" Circular Saw, 2-3/8" Depth of Cut, 13A Motor, 3500rpm
(Pack of
1)
SKU:64660 Item#: 64660
The S7-XP cuts mild steel to 5/16" thickness and to a depth of 2.25", cleanly cutting channel, angles, pipe and solids. Plastics and metals including mild steel, aluminum and stainless steel are cut as easy as plywood. A laser alignment guide speeds set-up time for straight, accurate and long cuts which are cool-to-the-touch in seconds.
• The 45° beveling capability makes this saw a must-have for welders, mechanical contractors, fabricators, maintenance personnel, farmers, fire and rescue, shipbuilders and roofers
• Built-in chip collector provides ultimate chip and spark control for added safety
• Light weight
• Retracting blade guard
• Cuts clean without burrs
• Spindal lock for fast and easy blade changes
• Laser alignment guide for more accurate cuts
• Cuts cool – the heat is generated through the chips and not through the workpiece
• Easy motor brush replacement
• Supplied with one mild steel blade, edge guide and an operating manual, all stored in a durable carrying/storage case
• Time saver – in less than 6 seconds the 7-1/4" saw will cut 5/16" x 4" mild steel
• UL 745 certified and listed
• CL approved
• Cuts a wide variety of metals including mild steel, aluminum and stainless steel
• Cuts angle iron, steel, black pipe, tubing, rebar, plate steel, metal studs and conduit
When cutting wood, the vented cover must be used. The vented cover IS NOT to be used when cutting steel or aluminum.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
High Torque Metal Cutting Saw 14 Inch W/ 66T Steel Blade
$0.00
Couldn't load pickup availability
Cryoflex High Torque Metal Cutting Saw 14 Inch W/O Blade
$0.00
Couldn't load pickup availability
14" Chop Saw 1450rpm 15A Motor
$0.00
Couldn't load pickup availability
Zirconium Grain Locking Grinding Disc 2"
$0.00
Couldn't load pickup availability
Twist-On Surface Conditioning Disc 2" Brown
$0.00
Couldn't load pickup availability
Small General Purpose Bimetal Hole Saw Kit 9Pcs
$0.00
Couldn't load pickup availability
Rocker Door and Exterior Molding Retainer
$0.00
Couldn't load pickup availability
Phillips Truss Head Sheet Metal Screw Steel 15mm
$0.00
Couldn't load pickup availability
Front Bumper Specialty Nut Steel M4.2-1.41
$0.00
Couldn't load pickup availability
D1 Portable Magnetic Drill 2" Depth of Cut
$0.00
Couldn't load pickup availability
High Torque Metal Cutting Saw 14 Inch W/ 66T Steel Blade
$0.00
Couldn't load pickup availability
D2X Portable Magnetic Drill 2" Depth of Cut
$0.00
Couldn't load pickup availability
Abrasive Hand Pad All Purpose 6 x 9"
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
$0.00
Couldn't load pickup availability
57Pc Torsion Impact Bit Master Set
$0.00
Couldn't load pickup availability
Product Description
The S7-XP cuts mild steel to 5/16" thickness and to a depth of 2.25", cleanly cutting channel, angles, pipe and solids. Plastics and metals including mild steel, aluminum and stainless steel are cut as easy as plywood. A laser alignment guide speeds set-up time for straight, accurate and long cuts which are cool-to-the-touch in seconds.• The 45° beveling capability makes this saw a must-have for welders, mechanical contractors, fabricators, maintenance personnel, farmers, fire and rescue, shipbuilders and roofers
• Built-in chip collector provides ultimate chip and spark control for added safety
• Light weight
• Retracting blade guard
• Cuts clean without burrs
• Spindal lock for fast and easy blade changes
• Laser alignment guide for more accurate cuts
• Cuts cool – the heat is generated through the chips and not through the workpiece
• Easy motor brush replacement
• Supplied with one mild steel blade, edge guide and an operating manual, all stored in a durable carrying/storage case
• Time saver – in less than 6 seconds the 7-1/4" saw will cut 5/16" x 4" mild steel
• UL 745 certified and listed
• CL approved
• Cuts a wide variety of metals including mild steel, aluminum and stainless steel
• Cuts angle iron, steel, black pipe, tubing, rebar, plate steel, metal studs and conduit
When cutting wood, the vented cover must be used. The vented cover IS NOT to be used when cutting steel or aluminum.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 64660 |
|---|---|
| Manufacturer Model #: | S7 |
| Blade Diameter | 7-1/4 " |
| Blade Arbor | 20 mm |
| Depth of Cut | 2-3/8" for Pipe or Angle Iron |
| Maximum RPM | 3,500 |
| Motor | 120V, 1500W, 50-60 Hz 13A |
| Weight | 14.3 lb |
| Dimensions | 12.25" H x 10.5" W x 16.5" L |
| UNSPSC #: | 27112802 |
| TAA Compliant: | No |
| Weight: | 25.0 lb |
