706 Hard Facing Buildup Stick Rod Electrode 5/32"
(Pack of
10.0)
Alloys for repairs and buildup prior to overlaying with more abrasion-resistant hardfacing.
Superior Advantages
• Versatile – easy to use on all steels
• Resists cracking
• Increased deposition rates save time and money
• Work hardens under impact
Buildup for hardfacing, joining manganese, carbon steels and stainless steels
Tensile Strength: 101,000 PSIElongation: 34%Hardness: Rc 45, work-hardenedPolarity: AC or DC Reverse
Typical Applications
• Shaft buildup
• Equipment part repairs – gears, booms, crusher rolls and hammers
• Welding alloy steel to manganese steel
• Frogs and switch points
Usage ProcedureUse AC or DC reverse polarity. Electrode may be used in contact or by holding an arc. When used for joining, stringer beads are best. When used as a build-up, weaving is acceptable. Manganese steel should be kept below 550°F (288°C) by skip welding or artificial cooling. Prior to build-up, all fatigued, cracked, or spalled material should be removed. Chip slag between passes.CANNOT BE TORCH CUT
Frequently Bought Together
170 Build Up Of Carbon And Low Alloy Steels 5/32
Couldn't load pickup availability
7770 Hard Facing Buildup Stick Rod Electrode 5/32"
Couldn't load pickup availability
706 Hard Facing Buildup Stick Rod Electrode 3/16"
Couldn't load pickup availability
173 Multi Purpose High Deposition Alloy For Joining And Build Up 1/8
Couldn't load pickup availability
671 Impact And Abrasion Resistant Flux Cored Self Sheilded 1/16X25LB
Couldn't load pickup availability
7220 Carbide Hard Facing Stick Rod Electrode 3/8"
Couldn't load pickup availability
Front Bumper Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Air Distributor Defroster Push-Type Retainer
Couldn't load pickup availability
Front/Rear Bumper Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Wear Plates Used By Maintenance Welder 1/4X5X7
Couldn't load pickup availability
Flat Soapstone Holder Heavy Duty
Couldn't load pickup availability
1/4 on 1/2 Dimension I Single Pass Overlay
Couldn't load pickup availability
Product Description
Alloys for repairs and buildup prior to overlaying with more abrasion-resistant hardfacing.Superior Advantages
• Versatile – easy to use on all steels
• Resists cracking
• Increased deposition rates save time and money
• Work hardens under impact
Buildup for hardfacing, joining manganese, carbon steels and stainless steels
Tensile Strength: 101,000 PSIElongation: 34%Hardness: Rc 45, work-hardenedPolarity: AC or DC Reverse
Typical Applications
• Shaft buildup
• Equipment part repairs – gears, booms, crusher rolls and hammers
• Welding alloy steel to manganese steel
• Frogs and switch points
Usage ProcedureUse AC or DC reverse polarity. Electrode may be used in contact or by holding an arc. When used for joining, stringer beads are best. When used as a build-up, weaving is acceptable. Manganese steel should be kept below 550°F (288°C) by skip welding or artificial cooling. Prior to build-up, all fatigued, cracked, or spalled material should be removed. Chip slag between passes.CANNOT BE TORCH CUT
Technical Specifications
| Item#: | P12675 |
|---|---|
| Welding Process | Stick |
| Type | Stick Electrode |
| Diameter | 5/32 " |
| Base Metal | Multi-Purpose |
| Hardness | 40-45 (WH) HRC |
| Polarity | AC/DCRP |
| UNSPSC #: | 23271810 |
| TAA Compliant: | Yes |
| Weight: | 10.5 lb |
Product Restrictions
