676 Flux Core Wire Extreme Abrasion Moderate Impact 1/16X33LBS
(Pack of
33.0)
A specially formulated flux cored wire designed to produce extremely wear-resistant deposits. The high concentration of small primary carbides greatly improves toughness and abrasion resistance over conventional chromium carbide alloys. Can be applied to carbon, low alloy, and manganese steels and can be used in hot wear applications up to 900°F/482°C.
• Smooth arc for superior control
• No gas required
• Deposit cross-checks readily
• Resists hot wear up to 900°F/482°C
• Hardness: Up to 64Rc
• Max Number of Passes: 2
• Impact Resistance: Moderate
• Machinability: Grind only
• Magnetic: – On Carbon Steel: Slightly – On Manganese Steel: No
• Hot Wear Applications: Up to 900°F/482°C
• Current: DCEP (DC+)
• Shielding Gas: Optional, 100% CO2
Frequently Bought Together
7222 Carbide Hard Facing Stick Rod Electrode 1/4"
Couldn't load pickup availability
7220 Carbide Hard Facing Stick Rod Electrode 1/2"
Couldn't load pickup availability
711 Carbide Hard Facing Stick Rod Electrode 3/16"
Couldn't load pickup availability
246 Carbide Hard Facing Stick Rod Electrode 1/4"
Couldn't load pickup availability
7355 Carbide Hard Facing Stick Rod Electrode Kit
Couldn't load pickup availability
711 Carbide Hard Facing Stick Rod Electrode 3/32"
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability
Front/Rear Bumper Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Metric Indented Hex Head Bolt with 17mm Washer
Couldn't load pickup availability
1/8 on 1/4 Dimension I Single Pass Overlay
Couldn't load pickup availability
201 Rectangular Wear Disc Plate 3 x 6 x 5/32"
Couldn't load pickup availability
Heat Stick 1050F Degrees
Couldn't load pickup availability
Product Description
A specially formulated flux cored wire designed to produce extremely wear-resistant deposits. The high concentration of small primary carbides greatly improves toughness and abrasion resistance over conventional chromium carbide alloys. Can be applied to carbon, low alloy, and manganese steels and can be used in hot wear applications up to 900°F/482°C.• Smooth arc for superior control
• No gas required
• Deposit cross-checks readily
• Resists hot wear up to 900°F/482°C
• Hardness: Up to 64Rc
• Max Number of Passes: 2
• Impact Resistance: Moderate
• Machinability: Grind only
• Magnetic: – On Carbon Steel: Slightly – On Manganese Steel: No
• Hot Wear Applications: Up to 900°F/482°C
• Current: DCEP (DC+)
• Shielding Gas: Optional, 100% CO2
Technical Specifications
| Item#: | EG67680062 |
|---|---|
| Welding Process | Flux-Core Arc Welding |
| Type | Flux-Cored Wire |
| Diameter | 1/16 " |
| Base Metal | Carbon And Alloy Steels |
| UNSPSC #: | 23271810 |
| TAA Compliant: | Yes |
| Weight: | 37.62 lb |
