9/16" Dia. Annular Cutter, 1" Cutting Depth, Pin Not Included
(Pack of
1)
SKU:PM08210507 Item#: PM08210507
• Drill Holes Faster - Only cuts the circumference
• More Accurate Holes - Cuts smoother with tighter tolerance
• Burr Free Holes - No finishing required
• Long Lasting - Made with high moly tool steel
• More cutting edges reduce loading and increase cutting speed
• Designed for cutting steel, stainless steel and non-ferrous metals up to 30Rc
Specifications
• Material: Molybdenum HSS
• Hardness: 62-64Rc
• Finish: Bright
• Depth of Cut: 25mm/1"
• Shank: 3/4" Weldon
Applications
• Truck frames
• Heavy Equipment frames
• Manufacturing equipment
• Structural steel
• Pipes
• Flanges
• Gusset plates
• Railing
• HVAC equipment
Note: Pins not included with individual cutters.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
HSS Annular Cutter 1"
$0.00
Couldn't load pickup availability
CryoBore 1/2" Dia Annular Cutter, 2-3/8" Cutting Depth
$0.00
Couldn't load pickup availability
High-Performance M2-AL Annular Cutter 2-1/16"
$0.00
Couldn't load pickup availability
CryoBore 1-1/16" Dia. Annular Cutter, 2-3/8" Cutting Depth
$0.00
Couldn't load pickup availability
Annular Cutter Ejector Pin For 1"- 1 Cutting Depth Cutters
$0.00
Couldn't load pickup availability
HSS Annular Cutter 3/4"
$0.00
Couldn't load pickup availability
Twist-On Abrasive Disc 3"
$0.00
Couldn't load pickup availability
Twist-On Surface Conditioning Disc 2" Maroon
$0.00
Couldn't load pickup availability
Steel Crimped End Brush 1/2"
$0.00
Couldn't load pickup availability
Radiator Grille Nut M4.2-1.41
$0.00
Couldn't load pickup availability
Fender Splash Shield Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Bumper Fascia Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
$0.00
Couldn't load pickup availability
21-Piece, 1/4" Shank, 2" Hex Power Bit Set
$0.00
Couldn't load pickup availability
Razor Blade Single Edge w/Notch
$0.00
Couldn't load pickup availability
Rear Bumper Fascia Grommet Nylon Gray #8
$0.00
Couldn't load pickup availability
Garnish Molding Retainer Nylon 13mm
$0.00
Couldn't load pickup availability
Odor Eliminator - New Car
$0.00
Couldn't load pickup availability
Rear Bumper Fascia Grommet Nylon Gray #8
$0.00
Couldn't load pickup availability
Garnish Molding Retainer Nylon 13mm
$0.00
Couldn't load pickup availability
Odor Eliminator - New Car
$0.00
Couldn't load pickup availability
Product Description
• Drill Holes Faster - Only cuts the circumference• More Accurate Holes - Cuts smoother with tighter tolerance
• Burr Free Holes - No finishing required
• Long Lasting - Made with high moly tool steel
• More cutting edges reduce loading and increase cutting speed
• Designed for cutting steel, stainless steel and non-ferrous metals up to 30Rc
Specifications
• Material: Molybdenum HSS
• Hardness: 62-64Rc
• Finish: Bright
• Depth of Cut: 25mm/1"
• Shank: 3/4" Weldon
Applications
• Truck frames
• Heavy Equipment frames
• Manufacturing equipment
• Structural steel
• Pipes
• Flanges
• Gusset plates
• Railing
• HVAC equipment
Note: Pins not included with individual cutters.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | PM08210507 |
|---|---|
| Cutting Diameter | 9/16 " |
| Depth of Cut | 1 " |
| UNSPSC #: | 23241600 |
| TAA Compliant: | No |
| Weight: | 0.19 lb |
