Annular Cutter, 1-13/16" Diameter, 1" Depth of Cut
(Pack of 1)

SKU:15244 Item#: 15244

Steelmax®

Steelmax® Annular Cutters reduce horsepower and torque requirements by only cutting the periphery of the hole resulting in a burr-free, reamed-quality hole. As a result, the operation is completed three times faster than costly pilot hole and step drilling. Chip load per tooth is greatly reduced, for high penetration, improved hole quality and longer tool life. The core or “slug” left behind is evidence of this efficient cutting method. Holes on curved surfaces as well as interrupted cuts can be made without distortion.
• Drill holes three times faster than with a twist drill
• Drill on curved surfaces such as pipe or tubing
• Produce reamed-quality, burr-free holes
• Overlap centers on existing holes
• Reduced machine size and horsepower requirements
• Cutters are made from high-performance M2-AL
Individual annular cutters do not come supplied with the center pins. Center pins are required and must be ordered separately.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Read More
Usually Ships: Today
While Supplies Last

Frequently Bought Together

DV_ZoomOriginal_P_CTPMP1090.jpg

9/16" Dia. Annular Cutter, 1" Cutting Depth, Pin Not Included

Item#: PM08210507
DV_ZoomOriginal_I_1574574.jpg

HSS Annular Cutter 1"

Item#: 1574574
DV_ZoomOriginal_P_CTPMP3086.jpg

CryoBore 1/2" Dia Annular Cutter, 2-3/8" Cutting Depth

Item#: DY81872900
DV_ZoomOriginal_P_CTPMP3086.jpg

CryoBore 1-1/16" Dia. Annular Cutter, 2-3/8" Cutting Depth

Item#: DY81873750
DV_ZoomOriginal_I_DY81860019.jpg

Annular Cutter Ejector Pin For 1"- 1 Cutting Depth Cutters

Item#: DY81860019
DV_ZoomOriginal_I_1574539.jpg

HSS Annular Cutter 3/4"

Item#: 1574539
DV_ZoomOriginal_I_17419.jpg

Twist-On Surface Conditioning Disc 2" Maroon

Item#: 17415
DV_ZoomOriginal_P_31404.jpg

Steel Crimped End Brush 1/2"

Item#: 95137
DV_ZoomOriginal_I_DY80600464.jpg

Cryobit 1/8" Dia. Maintenance Drill Bit , 135o Split Point, No Flats

Item#: DY80600864
DV_ZoomOriginal_I_1513544.jpg

Radiator Grille Nut M4.2-1.41

Item#: 1513544
DV_ZoomOriginal_I_P53958.jpg

Fender Splash Shield Retainer Nylon 20mm

Item#: P53958
DV_ZoomOriginal_I_KT12847.jpg

Bumper Fascia Push-Type Retainer Nylon 18mm

Item#: KT12847
DV_ZoomOriginal_I_KT15080.jpg

Spot Weld Remover Drill Bit 5/16" (M8)

Item#: KT15080
DV_ZoomOriginal_I_1641220.jpg

21-Piece, 1/4" Shank, 2" Hex Power Bit Set

Item#: 1641220
DV_ZoomOriginal_I_1638992CB.jpg

Compact Cordless Circular Saw Charging Bundle

Item#: 1638992CB
DV_ZoomOriginal_I_1500735.jpg

Garnish Molding Retainer Nylon 13mm

Item#: 1500735
DV_ZoomOriginal_I_1633827.jpg

Odor Eliminator - New Car

Item#: 1633827
DV_ZoomOriginal_I_1635720.jpg

Silver Fixed-Angle Metal TPMS Valve

Item#: 1635720
DV_ZoomOriginal_I_1500735.jpg

Garnish Molding Retainer Nylon 13mm

Item#: 1500735
DV_ZoomOriginal_I_1633827.jpg

Odor Eliminator - New Car

Item#: 1633827
DV_ZoomOriginal_I_1635720.jpg

Silver Fixed-Angle Metal TPMS Valve

Item#: 1635720

Product Description

Steelmax® Annular Cutters reduce horsepower and torque requirements by only cutting the periphery of the hole resulting in a burr-free, reamed-quality hole. As a result, the operation is completed three times faster than costly pilot hole and step drilling. Chip load per tooth is greatly reduced, for high penetration, improved hole quality and longer tool life. The core or “slug” left behind is evidence of this efficient cutting method. Holes on curved surfaces as well as interrupted cuts can be made without distortion.
• Drill holes three times faster than with a twist drill
• Drill on curved surfaces such as pipe or tubing
• Produce reamed-quality, burr-free holes
• Overlap centers on existing holes
• Reduced machine size and horsepower requirements
• Cutters are made from high-performance M2-AL
Individual annular cutters do not come supplied with the center pins. Center pins are required and must be ordered separately.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Technical Specifications

Item#: 15244
Manufacturer Model #: SM-AC-1813-1
Cutting Diameter 1-13/16 "
Depth of Cut 1 "
Tooth Material M2-AL
UNSPSC #: 23241600
TAA Compliant: No
Weight: 0.5 lb

Your Recently Viewed Items