Annular Cutter, 2-3/8" Diameter, 1" Depth of Cut
(Pack of
1)
SKU:15253 Item#: 15253
Steelmax® Annular Cutters reduce horsepower and torque requirements by only cutting the periphery of the hole resulting in a burr-free, reamed-quality hole. As a result, the operation is completed three times faster than costly pilot hole and step drilling. Chip load per tooth is greatly reduced, for high penetration, improved hole quality and longer tool life. The core or “slug” left behind is evidence of this efficient cutting method. Holes on curved surfaces as well as interrupted cuts can be made without distortion.
• Drill holes three times faster than with a twist drill
• Drill on curved surfaces such as pipe or tubing
• Produce reamed-quality, burr-free holes
• Overlap centers on existing holes
• Reduced machine size and horsepower requirements
• Cutters are made from high-performance M2-AL
Individual annular cutters do not come supplied with the center pins. Center pins are required and must be ordered separately.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
CryoBore 1-1/2" Dia. Annular Cutter, 2-3/8" Cutting Depth
Couldn't load pickup availability
HSS Annular Cutter 1-3/4"
Couldn't load pickup availability
HSS Annular Cutter 1/2"
Couldn't load pickup availability
CryoBore 1-1/2" Dia. Annular Cutter, 2-3/8" Cutting Depth
Couldn't load pickup availability
HSS Annular Cutter 1-3/4"
Couldn't load pickup availability
HSS Annular Cutter 1/2"
Couldn't load pickup availability
Aluminum Oxide Grain Locking Grinding Disc 2"
Couldn't load pickup availability
Zirconium Grain Locking Grinding Disc 2"
Couldn't load pickup availability
Abrasive Bristle Wire Belt Steel 23mm
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
Couldn't load pickup availability
Bumper Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Abrasive Hand Pad All Purpose 6 x 9"
Couldn't load pickup availability
21-Piece, 1/4" Shank, 2" Hex Power Bit Set
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 1/4"
Couldn't load pickup availability
Product Description
Steelmax® Annular Cutters reduce horsepower and torque requirements by only cutting the periphery of the hole resulting in a burr-free, reamed-quality hole. As a result, the operation is completed three times faster than costly pilot hole and step drilling. Chip load per tooth is greatly reduced, for high penetration, improved hole quality and longer tool life. The core or “slug” left behind is evidence of this efficient cutting method. Holes on curved surfaces as well as interrupted cuts can be made without distortion.• Drill holes three times faster than with a twist drill
• Drill on curved surfaces such as pipe or tubing
• Produce reamed-quality, burr-free holes
• Overlap centers on existing holes
• Reduced machine size and horsepower requirements
• Cutters are made from high-performance M2-AL
Individual annular cutters do not come supplied with the center pins. Center pins are required and must be ordered separately.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 15253 |
|---|---|
| Cutting Diameter | 2-3/8 " |
| Depth of Cut | 1 " |
| Tooth Material | M2-AL |
| UNSPSC #: | 23241600 |
| TAA Compliant: | No |
| Weight: | 0.77 lb |
