Anchoring Compound, High Strength, 11000PSI Compressive Strength, 5.5oz Net Weight
(Pack of
1)
SKU:91664 Item#: 91664
Ideal where conventional concrete anchors do not perform well: in high vibration, close spacing or close-to-edge situations. Power Pouch is pre-measured, with both resin and hardener in a single pouch. Contains a sealed plastic pouch, a threaded rod, a nut, and a washer.
• Twice the pull-out strength of comparable diameter stud-type anchor
• Two to four times the compressive strength and ten to fifteen times the tensile strength of base concrete
• Pre-mixed. No need for field proportioning
• Highly pourable
• Indefinite Shelf Life
• No expansion stress imparted to substrate
• Compressive strength: 11,000 PSI
NOTE: Not recommended for horizontal or overhead applications.
Couldn't load pickup availability
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
Frequently Bought Together
Masonry Anchor Assortment 700Pcs
$0.00
Couldn't load pickup availability
Toggle Bolt Anchor Assortment 70Pcs
$0.00
Couldn't load pickup availability
Drill 'N Drive Masonry Anchor Assortment 283Pcs
$0.00
Couldn't load pickup availability
1/4-20X3/4 Male Dyna Base Mount Reactangle
$0.00
Couldn't load pickup availability
1/4-20X3/4 Male Dyna Base Mount Round
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M8-1.25 x 30mm
$0.00
Couldn't load pickup availability
DIN 125A Flat Washer Grade 140 HV M8
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M8-1.25 x 16mm
$0.00
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Drive Rivet Nylon M8
$0.00
Couldn't load pickup availability
Bumper Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Product Description
Ideal where conventional concrete anchors do not perform well: in high vibration, close spacing or close-to-edge situations. Power Pouch is pre-measured, with both resin and hardener in a single pouch. Contains a sealed plastic pouch, a threaded rod, a nut, and a washer.• Twice the pull-out strength of comparable diameter stud-type anchor
• Two to four times the compressive strength and ten to fifteen times the tensile strength of base concrete
• Pre-mixed. No need for field proportioning
• Highly pourable
• Indefinite Shelf Life
• No expansion stress imparted to substrate
• Compressive strength: 11,000 PSI
NOTE: Not recommended for horizontal or overhead applications.
Technical Specifications
| Item#: | 91664 |
|---|---|
| Type | High Strength Anchoring Compound |
| Description | 5.5 Oz. Net Wt. |
| Size | 5.5 Oz. |
| Recommended Hole Diameter | 1/4 to 1 1/2 " |
| Recommended Threaded Rod Diameter | 3/16 to 1 1/4 " |
| Color | Tan/Gray |
| Cure Time | 90 min |
| Specific Gravity | 1.1 |
| Temperature Range | 18 - 100 °F |
| Working Time | 15 min |
| UNSPSC #: | 31162103 |
| TAA Compliant: | Yes |
| Weight: | 0.65 lb |
Product Restrictions
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
This item cannot be sold in the following regions: CA
