Cordless Drill Threaded Insert Installation Tool, 1/4" Pipe Size, 14mm Maximum Stroke, 6.35mm Drive Shank, 5.12 x 2.36"
(Pack of
1)
SKU:28613 Item#: 28613
• Easily converts cordless drill motors into a threaded insert installation tool
Includes the following conversion kits: 8–32, 10–24, 10–32 and 1/4–20
• Maximum Stroke: 0.550" (14mm)
• Length x Dia.: 5.12" x 2.36" (130mm x 60mm)
• Drive Shank Dia.: 1/4" (6.35mm)
• Weight: 1 lb.
• Battery for Cordless Drill: 12V minimum with adjustable torque
• Threaded Insert Sizes: 6–32 through 5/16–18*
Use as Intended.NutDrill™ is intended to be used as an attachment with cordless drilling machines of 12V or more with reversible turn and torque settings.
Installation Procedures:
1. Select the correct mandrel and nosepiece (conversion kit).
2. Install mandrel into the NutDrill™.
3. Install the nosepiece.
4. Choose a battery-operated drill motor (12V minimum).
5. Insert NutDrill™ hex shank into the jaws of the drill motor.
6. Set torque to the lowest setting. (If the torque setting is too high, the mandrel will break.)
7. While holding NutDrill™ outer body in one hand, install the threaded insert onto the mandrel and slowly turn the drill motor (forward) to start setting the insert. Increase torque until insert is properly set.
8. After insert is properly set, switch the drill motor to reverse and slowly back the mandrel out of the set insert.
NOTE: Drill motor not included
*NutDrill™ will not set 5/16–18 Diamond Grip Threaded Inserts
Frequently Bought Together
DIN 125A Flat Washer Grade 140 HV M8
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M8-1.25 x 16mm
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 30mm
$0.00
Couldn't load pickup availability
Drive Rivet Nylon M8
$0.00
Couldn't load pickup availability
Bumper Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Bumper Radiator and Grille Drive Rivet 7mm Hole
$0.00
Couldn't load pickup availability
Conversion Kit #10-32
$0.00
Couldn't load pickup availability
Conversion Kit 1/4-20
$0.00
Couldn't load pickup availability
Rivet Nut Hand Tool 6mm
$0.00
Couldn't load pickup availability
Diamond Grip II Threaded Insert M8-1.25
$0.00
Couldn't load pickup availability
Diamond Grip II Threaded Insert M5-0.8
$0.00
Couldn't load pickup availability
Conversion Kit #10-32
$0.00
Couldn't load pickup availability
Product Description
• Easily converts cordless drill motors into a threaded insert installation toolIncludes the following conversion kits: 8–32, 10–24, 10–32 and 1/4–20
• Maximum Stroke: 0.550" (14mm)
• Length x Dia.: 5.12" x 2.36" (130mm x 60mm)
• Drive Shank Dia.: 1/4" (6.35mm)
• Weight: 1 lb.
• Battery for Cordless Drill: 12V minimum with adjustable torque
• Threaded Insert Sizes: 6–32 through 5/16–18*
Use as Intended.NutDrill™ is intended to be used as an attachment with cordless drilling machines of 12V or more with reversible turn and torque settings.
Installation Procedures:
1. Select the correct mandrel and nosepiece (conversion kit).
2. Install mandrel into the NutDrill™.
3. Install the nosepiece.
4. Choose a battery-operated drill motor (12V minimum).
5. Insert NutDrill™ hex shank into the jaws of the drill motor.
6. Set torque to the lowest setting. (If the torque setting is too high, the mandrel will break.)
7. While holding NutDrill™ outer body in one hand, install the threaded insert onto the mandrel and slowly turn the drill motor (forward) to start setting the insert. Increase torque until insert is properly set.
8. After insert is properly set, switch the drill motor to reverse and slowly back the mandrel out of the set insert.
NOTE: Drill motor not included
*NutDrill™ will not set 5/16–18 Diamond Grip Threaded Inserts
Technical Specifications
| Item#: | 28613 |
|---|---|
| Type | Hand Tool |
| Pipe Size | 1/4 " |
| Size | W/4 " |
| Description | NutDrillT Installation Tool |
| UNSPSC #: | 27112810 |
| TAA Compliant: | Yes |
| Weight: | 1.6 lb |
