Countersink for Chamfering or Deburring, 82° Double End Single Flute, #0 to #4 Screws, 1/4 x 2"
(Pack of
1)
SKU:97620 Item#: 97620
• 82° included angle
• Single cutting edge provides fast stock removal; finishes chatter-free
• Finish reduces chip build-up on cutting edge
• Recommended RPM is half the nominal drilling speed
• Designed for general-purpose countersinking, chamfering or deburring
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Chatterless Countersink 82° Six Flute 3/4"
Couldn't load pickup availability
Chatterless Countersink 82° Six Flute 3/8"
Couldn't load pickup availability
Chatterless Countersink 82° Six Flute 1/2"
Couldn't load pickup availability
Chatterless Countersink 90° Six Flute 5/8"
Couldn't load pickup availability
Chatterless Countersink 82° Six Flute 1/4"
Couldn't load pickup availability
Chatterless Countersink 82° Single Flute 5/8"
Couldn't load pickup availability
Aluminum Oxide Grain Locking Grinding Disc 2"
Couldn't load pickup availability
Abrasive Bristle Wire Belt Steel 23mm
Couldn't load pickup availability
Polymer Wheel Rubber Eraser 30mm
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
Couldn't load pickup availability
Push-Type Retainer Nylon 16 x 19mm
Couldn't load pickup availability
Bumper Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
2.1 Round Head Ratchet 3/8 Drive 168 Tooth
Couldn't load pickup availability
Abrasive Hand Pad All Purpose 6 x 9"
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 1/4"
Couldn't load pickup availability
Product Description
• 82° included angle• Single cutting edge provides fast stock removal; finishes chatter-free
• Finish reduces chip build-up on cutting edge
• Recommended RPM is half the nominal drilling speed
• Designed for general-purpose countersinking, chamfering or deburring
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 97620 |
|---|---|
| Type | Countersink |
| Body Diameter | 1/4 " |
| Flutes | Single |
| Included Angle | 82 ° |
| Shank Size | 1/4 " |
| Overall Length | 2 " |
| For Screw Size | No. 0 - No. 4 |
| Cutting Diameter Min. | 0.09 " |
| Cutting Diameter Max. | 0.23 " |
| UNSPSC #: | 23241603 |
| TAA Compliant: | Yes |
| Weight: | 0.03 lb |
Product Restrictions
