CryoBore 7/8" Carbide Tooth Annular Cutter, 2" Cutting Depth
(Pack of
1)
SKU:DY81883500 Item#: DY81883500
• Smooth Cutting - Finished holes are virtually scratchfree with very few or no burrs at the entry or exit
• Time Saving - Cut faster than twist drills and last much longer
• Cut Tougher Metals – Premium grade tungstencarbide teeth drill into materials up to 3" thick and as hard as 45Rc
• Weldon shank
Note: Center Pin is included with cutter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
CryoBore 9/16" Dia. Annular Cutter, 1-3/16" Cutting Depth
$0.00
Couldn't load pickup availability
CryoBore 1-1/8" Dia. Annular Cutter, 1-3/16" Cutting Depth
$0.00
Couldn't load pickup availability
CryoBore 1-3/16" Dia. Annular Cutter, 2-3/8" Cutting Depth
$0.00
Couldn't load pickup availability
CryoBore 1-1/8" Dia. Annular Cutter, 2-3/8" Cutting Depth
$0.00
Couldn't load pickup availability
CryoBore 9/16" Dia. Annular Cutter, 1-3/16" Cutting Depth
$0.00
Couldn't load pickup availability
CryoBore 1-1/8" Dia. Annular Cutter, 1-3/16" Cutting Depth
$0.00
Couldn't load pickup availability
1/8" - 1/2 " Cryonitride Spiral Fluted Step Drill - 1/4" Shank
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
$0.00
Couldn't load pickup availability
Abrasive Bristle Wire Belt Steel 23mm
$0.00
Couldn't load pickup availability
Front/Rear Bumper Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Bumper Clip Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 10mm Hole
$0.00
Couldn't load pickup availability
Universal Socket Set, Metric, 3/8" Drive, 12pc
$0.00
Couldn't load pickup availability
18" Locking Smooth Operator Clamp
$0.00
Couldn't load pickup availability
Universal Socket Set, 3/8" Drive, 20pc
$0.00
Couldn't load pickup availability
Product Description
• Smooth Cutting - Finished holes are virtually scratchfree with very few or no burrs at the entry or exit• Time Saving - Cut faster than twist drills and last much longer
• Cut Tougher Metals – Premium grade tungstencarbide teeth drill into materials up to 3" thick and as hard as 45Rc
• Weldon shank
Note: Center Pin is included with cutter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | DY81883500 |
|---|---|
| Cutting Diameter | 7/8 " |
| Depth of Cut | 2 " |
| Tooth Material | Tungsten Carbide |
| UNSPSC #: | 23241615 |
| TAA Compliant: | No |
| Weight: | 0.38 lb |
