Cryocut 1/4" Body Dia. 82o Angle Countersink, 3-Flute
(Pack of
1.0)
• Three-flute center reamers cut countersinks and recesses for extisting holes
• Cryophase™ treatment extends the wear resistance and useful life of these high speed steel countersinks
• 82°, 90° and 100° angles cover countersink requirements for most common fastener head styles
Specifications
• Material: High Speed Steel
• Hardness: 64-66Rc
• Cryophase™: Thermal cycling cryogenic treatment
Applications
• 82° - commonly found on oval countersunk head machine screws, flat head tapping screws, oval trim head tapping screws, socket flat head cap screws and countersunk head plow bolts
• 90° - Commonly found on oval head rivets and flat head countersunk rivets
• 100° - Commonly found on flat head blind rivets, self-plugging rivets, flush head drive pin rivets, close tolerance flat countersunk head machine screws, and flat head tapping screws
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Chatterless Countersink 82° Single Flute 3/16"
Couldn't load pickup availability
Cryocut 1" Body Dia. 82o Angle Countersink, 3-Flute
Couldn't load pickup availability
Chatterless Countersink Kit 4Pcs 82° Single Flute
Couldn't load pickup availability
Countersink Drill Bit 5/64"
Couldn't load pickup availability
Cryocut 1" Body Dia. 90o Angle Countersink, 3-Flute
Couldn't load pickup availability
Chatterless Countersink 82° Six Flute 3/8"
Couldn't load pickup availability
Reciprocating Saw Blade 9" 14TPI
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability
Air Saw Blade 4" 32TPI
Couldn't load pickup availability
Cowl Bumper Fender Liner/Engine Under Cover Rivet
Couldn't load pickup availability
Bumper Clip Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Abrasive Bristle Wire Belt Steel 23mm
Couldn't load pickup availability
Razor Blade Single Edge w/Notch
Couldn't load pickup availability
Blade Disposal Container
Couldn't load pickup availability
Product Description
• Three-flute center reamers cut countersinks and recesses for extisting holes• Cryophase™ treatment extends the wear resistance and useful life of these high speed steel countersinks
• 82°, 90° and 100° angles cover countersink requirements for most common fastener head styles
Specifications
• Material: High Speed Steel
• Hardness: 64-66Rc
• Cryophase™: Thermal cycling cryogenic treatment
Applications
• 82° - commonly found on oval countersunk head machine screws, flat head tapping screws, oval trim head tapping screws, socket flat head cap screws and countersunk head plow bolts
• 90° - Commonly found on oval head rivets and flat head countersunk rivets
• 100° - Commonly found on flat head blind rivets, self-plugging rivets, flush head drive pin rivets, close tolerance flat countersunk head machine screws, and flat head tapping screws
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | DY80850106 |
|---|---|
| Type | Countersink |
| Body Diameter | 1/4 " |
| Flutes | Three |
| Included Angle | 82 ° |
| Shank Size | 1/4 " |
| Shank Length | 7/8 " |
| Overall Length | 1-1/2 " |
| For Screw Size | No. 0 - No. 3 |
| Centerline Angle | 41 ° |
| UNSPSC #: | 23241603 |
| TAA Compliant: | No |
| Weight: | 0.025 lb |
Product Restrictions
