DOT Air Brake Compression Connector for Nylon Tubing, Male, Brass, 3/8" x 1/4-18, Tube x Pipe
(Pack of
5)
SKU:84268 Item#: 84268
• Fittings are shipped with nuts, sleeves and inserts preassembled, ready to slip onto tubing
• Meets D.O.T. FMVSS 571.106
• Temperature range: –40°F to +200°F (–40°C to +93°C)
• Exceeds pressure requirements of automotive air brake systems
• Typical applications include air brake systems, air control and gauge lines
• Used with nylon tubing (SAE J844, Type 3)
Assembly Instructions
1. Cut tubing squarely.
2. Insert tubing into fitting until bottomed on seat.
3. Tighten nut with wrench until one thread remains visible on the fitting body; or, the nut should be screwed down finger-tight, then wrench-tightened as indicated in the table (this will allow for a number of remakes).
Frequently Bought Together
DOT Compression Insert Male Brass 1/2 x 3/8"
$0.00
Couldn't load pickup availability
Parker DOT Compression - Nylon Male Elbow 90 Degrees 1/2x1/2
$0.00
Couldn't load pickup availability
Parker DOT Field Attachable - Spring Guard 3/8
$0.00
Couldn't load pickup availability
Ball Check Grease Fitting Straight
$0.00
Couldn't load pickup availability
Air Brake Tube Insert Brass 3/8"
$0.00
Couldn't load pickup availability
Parker DOT PTC Male Elbow 90 Degrees 3/4x1/2
$0.00
Couldn't load pickup availability
Hose Clamp 304 SS 11/16 to 1-1/2"
$0.00
Couldn't load pickup availability
Hose Clamp 304 SS 9/16 to 1-1/4"
$0.00
Couldn't load pickup availability
DOT Connector Male Brass 3/8 x 1/4-18
$0.00
Couldn't load pickup availability
Pipe Street Tee Brass 1/2-14 x 1/2-14 x 1/2-14
$0.00
Couldn't load pickup availability
Pipe Bushing Brass 1/2-14 x 3/8-18
$0.00
Couldn't load pickup availability
Super 77 Miniature Hose Clamp SS 7/32 to 5/8"
$0.00
Couldn't load pickup availability
Front Bumper Push-Type Retainer Nylon 10mm
$0.00
Couldn't load pickup availability
Nylon Cable Tie 15-1/4" Black
$0.00
Couldn't load pickup availability
Front Bumper Specialty Nut Steel M4.2-1.41
$0.00
Couldn't load pickup availability
Molding Tape Adhesion Promoter Clear 7.4fl.oz
$0.00
Couldn't load pickup availability
Seam Sealing Tape 8mm x 26'
$0.00
Couldn't load pickup availability
Premium Nitrile Gloves, Black, 6 Mil, Large, 100/Box
$0.00
Couldn't load pickup availability
Product Description
• Fittings are shipped with nuts, sleeves and inserts preassembled, ready to slip onto tubing• Meets D.O.T. FMVSS 571.106
• Temperature range: –40°F to +200°F (–40°C to +93°C)
• Exceeds pressure requirements of automotive air brake systems
• Typical applications include air brake systems, air control and gauge lines
• Used with nylon tubing (SAE J844, Type 3)
Assembly Instructions
1. Cut tubing squarely.
2. Insert tubing into fitting until bottomed on seat.
3. Tighten nut with wrench until one thread remains visible on the fitting body; or, the nut should be screwed down finger-tight, then wrench-tightened as indicated in the table (this will allow for a number of remakes).
Technical Specifications
| Item#: | 84268 |
|---|---|
| Fitting Type | Compression - Nylon |
| Style | DOT |
| Material | Brass |
| Configuration | Male Connector |
| Connection Type A x B | Tube x Pipe |
| Fitting Dimension A | 3/8 " |
| Fitting Dimension B | 1/4-18 " |
| Type | Compression |
| UNSPSC #: | 25171700 |
| TAA Compliant: | No |
| Weight: | 0.4 lb |
Product Restrictions
