DOT Air Brake Compression Elbow for Nylon Tubing, 45°, Male, Brass, 1/2" x 1/2-14, Tube x Pipe
(Pack of
2)
SKU:1511588 Item#: 1511588
• Fittings are shipped with nuts, sleeves and inserts preassembled, ready to slip onto tubing
• Meets D.O.T. FMVSS 571.106
• Temperature range: –40°F to +200°F (–40°C to +93°C)
• Exceeds pressure requirements of automotive air brake systems
• Typical applications include air brake systems, air control and gauge lines
• Used with nylon tubing (SAE J844, Type 3)
• Used with nylon tubing (SAE J844, Type 3)
Assembly Instructions
1. Cut tubing squarely.
2. Insert tubing into fitting until bottomed on seat.
3. Tighten nut with wrench until one thread remains visible on the fitting body; or, the nut should be screwed down finger-tight, then wrench-tightened as indicated in the table (this will allow for a number of remakes).
Frequently Bought Together
DOT Compression Connector Male Brass 1/2 x 1/2"
$0.00
Couldn't load pickup availability
DOT Compression Connector Female Brass 1/2 x 7/8"
$0.00
Couldn't load pickup availability
DOT Compression Elbow Male 90° Brass 5/8 x 3/4"
$0.00
Couldn't load pickup availability
Ball Check Grease Fitting Straight
$0.00
Couldn't load pickup availability
Air Brake Tube Insert Brass 3/8"
$0.00
Couldn't load pickup availability
Parker DOT PTC Male Elbow 90 Degrees 3/4x1/2
$0.00
Couldn't load pickup availability
Hose Clamp 304 SS 11/16 to 1-1/2"
$0.00
Couldn't load pickup availability
DOT Union Nylon 1/4 x 1/4"
$0.00
Couldn't load pickup availability
Silicone Coolant/Heater Hose Clamp 13/16 to 1-3/4"
$0.00
Couldn't load pickup availability
Air Conditioning Slim Line Sealing Washer
$0.00
Couldn't load pickup availability
FLEXAIR 3/8" I.D. x 35' air hose
$0.00
Couldn't load pickup availability
Quick Disconnect Plug Steel 1/4" x 1/4-18
$0.00
Couldn't load pickup availability
Wheel Opening Drive Rivet Aluminum 5/32"
$0.00
Couldn't load pickup availability
Bumper Fascia Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Fender Splash Shield Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Replacement Broom Handle with Threaded End
$0.00
Couldn't load pickup availability
Releasable Nylon Cable Tie 5.5" Black
$0.00
Couldn't load pickup availability
Reciprocating Saw Blade 6" 8TPI
$0.00
Couldn't load pickup availability
Replacement Broom Handle with Threaded End
$0.00
Couldn't load pickup availability
Releasable Nylon Cable Tie 5.5" Black
$0.00
Couldn't load pickup availability
Reciprocating Saw Blade 6" 8TPI
$0.00
Couldn't load pickup availability
Product Description
• Fittings are shipped with nuts, sleeves and inserts preassembled, ready to slip onto tubing• Meets D.O.T. FMVSS 571.106
• Temperature range: –40°F to +200°F (–40°C to +93°C)
• Exceeds pressure requirements of automotive air brake systems
• Typical applications include air brake systems, air control and gauge lines
• Used with nylon tubing (SAE J844, Type 3)
• Used with nylon tubing (SAE J844, Type 3)
Assembly Instructions
1. Cut tubing squarely.
2. Insert tubing into fitting until bottomed on seat.
3. Tighten nut with wrench until one thread remains visible on the fitting body; or, the nut should be screwed down finger-tight, then wrench-tightened as indicated in the table (this will allow for a number of remakes).
Technical Specifications
| Item#: | 1511588 |
|---|---|
| Manufacturer Model #: | 84314 |
| Fitting Type | Compression - Nylon Tubing |
| Style | DOT |
| Material | Brass |
| Configuration | Male Elbow 45 Degrees |
| Connection Type A x B | Tube x Pipe |
| Fitting Dimension A | 1/2 " |
| Fitting Dimension B | 1/2-14 |
| Size | 1/2X1/2 |
| Type | Compression |
| UNSPSC #: | 25171700 |
| TAA Compliant: | No |
| Weight: | 0.49 lb |
Product Restrictions
