DOT Air Brake Compression Elbow for Nylon Tubing, 90°, Male, Brass, 5/8 x 3/4", Tube x Pipe
(Pack of
2)
SKU:96885 Item#: 96885
Easily tackle piping challenges with a durable and reliable brass compression elbow. Designed to join pipes at a 90-degree angle, this PTC fitting provides a seamless solution for changing pipe direction, even in areas where soldering is impractical or unsafe. The compression system—using ferrules and nuts—ensures a secure, leak-resistant connection without the need for welding or soldering. Crafted from corrosion-resistant brass, it offers long-lasting strength and cost-effectiveness, making it an ideal choice for plumbers, contractors, and industrial applications involving water or fluid systems.
• Fittings are shipped with nuts, sleeves and inserts preassembled, ready to slip onto tubing
• Meets D.O.T. FMVSS 571.106
• Temperature range: –40°F to +200°F (–40°C to +93°C)
• Exceeds pressure requirements of automotive air brake systems
• Typical applications include air brake systems, air control and gauge lines
• Used with nylon tubing (SAE J844, Type 3)
Assembly Instructions
1. Cut tubing squarely.
2. Insert tubing into fitting until bottomed on seat.
3. Tighten nut with wrench until one thread remains visible on the fitting body; or, the nut should be screwed down finger-tight, then wrench-tightened as indicated in the table (this will allow for a number of remakes).
Frequently Bought Together
Parker DOT Compression - Nylon Male Run Tee 1/4x1/8x1/4
Couldn't load pickup availability
DOT Compression Elbow Male 90° Brass 5/8 x 3/4"
Couldn't load pickup availability
Parker DOT Compression - Nylon Female Elbow 90 Degrees 3/8x1/4
Couldn't load pickup availability
Parker DOT Compression - Nylon Male Connector 3/8x1/8
Couldn't load pickup availability
Air Conditioning GM Sealing Washers
Couldn't load pickup availability
DOT Swivel Elbow Male 360° Brass 1/4 x 1/4-18
Couldn't load pickup availability
Pipe Street Elbow Brass 45° 1/8-27 x 1/8-27
Couldn't load pickup availability
Pipe Elbow Brass 90° 1/8-27 x 1/8-27
Couldn't load pickup availability
Fender Liner Screw Grommet Nylon M5.5
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 7mm Hole
Couldn't load pickup availability
Product Description
Easily tackle piping challenges with a durable and reliable brass compression elbow. Designed to join pipes at a 90-degree angle, this PTC fitting provides a seamless solution for changing pipe direction, even in areas where soldering is impractical or unsafe. The compression system—using ferrules and nuts—ensures a secure, leak-resistant connection without the need for welding or soldering. Crafted from corrosion-resistant brass, it offers long-lasting strength and cost-effectiveness, making it an ideal choice for plumbers, contractors, and industrial applications involving water or fluid systems.• Fittings are shipped with nuts, sleeves and inserts preassembled, ready to slip onto tubing
• Meets D.O.T. FMVSS 571.106
• Temperature range: –40°F to +200°F (–40°C to +93°C)
• Exceeds pressure requirements of automotive air brake systems
• Typical applications include air brake systems, air control and gauge lines
• Used with nylon tubing (SAE J844, Type 3)
Assembly Instructions
1. Cut tubing squarely.
2. Insert tubing into fitting until bottomed on seat.
3. Tighten nut with wrench until one thread remains visible on the fitting body; or, the nut should be screwed down finger-tight, then wrench-tightened as indicated in the table (this will allow for a number of remakes).
Technical Specifications
| Item#: | 96885 |
|---|---|
| Fitting Type | Compression - Nylon |
| Style | DOT |
| Material | Brass |
| Configuration | Male Elbow 90 Degrees |
| Connection Type A x B | Tube x Pipe |
| Fitting Dimension A | 5/8 " |
| Fitting Dimension B | 3/4-14 |
| Size | 5/8TX3/4P |
| Type | Compression |
| UNSPSC #: | 25171700 |
| TAA Compliant: | No |
| Weight: | 1.04 lb |
