DOT Air Brake Compression Elbow for Nylon Tubing, 90°, Male, Brass, 3/8" x 1/2-14, Tube x Pipe
(Pack of
5)
SKU:1511568 Item#: 1511568
• Fittings are shipped with nuts, sleeves and inserts preassembled, ready to slip onto tubing
• Meets D.O.T. FMVSS 571.106
• Temperature range: –40°F to +200°F (–40°C to +93°C)
• Exceeds pressure requirements of automotive air brake systems
• Typical applications include air brake systems, air control and gauge lines
• Used with nylon tubing (SAE J844, Type 3)
Assembly Instructions
1. Cut tubing squarely.
2. Insert tubing into fitting until bottomed on seat.
3. Tighten nut with wrench until one thread remains visible on the fitting body; or, the nut should be screwed down finger-tight, then wrench-tightened as indicated in the table (this will allow for a number of remakes).
Frequently Bought Together
DOT Compression Nut Brass 3/8"
$0.00
Couldn't load pickup availability
DOT Compression Elbow Male 90° Brass 3/8 x 1/8"
$0.00
Couldn't load pickup availability
DOT Compression Sleeve Brass 1/4"
$0.00
Couldn't load pickup availability
DOT Connector Male Brass 3/8 x 1/4-18
$0.00
Couldn't load pickup availability
DOT Compression Run Tee Male 3/8 x 3/8 x 3/8"
$0.00
Couldn't load pickup availability
DOT Compression Union Brass 1/4"
$0.00
Couldn't load pickup availability
DOT Connector Male Brass 5/8 x 1/2-14
$0.00
Couldn't load pickup availability
DOT Swivel Elbow Male 360° Brass 3/8 x 1/4-18
$0.00
Couldn't load pickup availability
DOT Compression Connector Male Brass 3/8 x 3/8"
$0.00
Couldn't load pickup availability
Miniature Clamp SS 7/32 to 5/8"
$0.00
Couldn't load pickup availability
Slotted Hex Head Hose Clamp 301 SS 9/16 to 1-1/16"
$0.00
Couldn't load pickup availability
DOT Connector Male Brass 1/4 x 1/8-27
$0.00
Couldn't load pickup availability
Bumper Clip Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Front/Rear Bumper Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
$0.00
Couldn't load pickup availability
Bumper Grommet Nylon #10
$0.00
Couldn't load pickup availability
Twist Knot Wire Wheel 3" Dia., .014" Wire Dia., 1/4" Shank
$0.00
Couldn't load pickup availability
Adhesion Promoter - 16oz
$0.00
Couldn't load pickup availability
Bumper Grommet Nylon #10
$0.00
Couldn't load pickup availability
Twist Knot Wire Wheel 3" Dia., .014" Wire Dia., 1/4" Shank
$0.00
Couldn't load pickup availability
Adhesion Promoter - 16oz
$0.00
Couldn't load pickup availability
Product Description
• Fittings are shipped with nuts, sleeves and inserts preassembled, ready to slip onto tubing• Meets D.O.T. FMVSS 571.106
• Temperature range: –40°F to +200°F (–40°C to +93°C)
• Exceeds pressure requirements of automotive air brake systems
• Typical applications include air brake systems, air control and gauge lines
• Used with nylon tubing (SAE J844, Type 3)
Assembly Instructions
1. Cut tubing squarely.
2. Insert tubing into fitting until bottomed on seat.
3. Tighten nut with wrench until one thread remains visible on the fitting body; or, the nut should be screwed down finger-tight, then wrench-tightened as indicated in the table (this will allow for a number of remakes).
Technical Specifications
| Item#: | 1511568 |
|---|---|
| Manufacturer Model #: | 84286 |
| Fitting Type | Compression - Nylon Tubing |
| Style | DOT |
| Material | Brass |
| Configuration | Male Elbow 90 Degrees |
| Connection Type A x B | Tube x Pipe |
| Fitting Dimension A | 3/8 " |
| Fitting Dimension B | 1/2-14 |
| Size | 3/8X1/2 |
| Type | Compression |
| UNSPSC #: | 25171700 |
| TAA Compliant: | No |
| Weight: | 0.93 lb |
Product Restrictions
