Hollow Wall Screw Anchor, Steel, Zinc Finish, Long Style, 1/8"
(Pack of
50)
SKU:25111 Item#: 25111
• Zinc rust-resistant finish
• Dual head Phillips/slotted
1. Place fastener against wall and drive in with hammer. Stop when flange rests against the face of the wall.
2. Turn screw with screwdriver – anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Frequently Bought Together
Lag Screw Shield Anchor Long Style 3/8 x 2-1/2"
$0.00
Couldn't load pickup availability
Double Expansion Shield Anchor Alloy Steel 5/8"
$0.00
Couldn't load pickup availability
Masonry Sleeve Anchor Steel 1/4 x 2-1/4"
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 40mm
$0.00
Couldn't load pickup availability
Hex Nut Grade 8 Steel M12-1.75
$0.00
Couldn't load pickup availability
Sheet Metal Screw Phillips Truss Head #14 x 3/4"
$0.00
Couldn't load pickup availability
Radiator Grille Nut M4.2-1.41
$0.00
Couldn't load pickup availability
Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Molding Clip with Sealer Nylon White 11.5 x 21
$0.00
Couldn't load pickup availability
Hollow Wall Screw Anchor Steel Short Style 1/8"
$0.00
Couldn't load pickup availability
Wing-Type Toggle Bolt Anchor Steel 1/4-20 x 6"
$0.00
Couldn't load pickup availability
Hollow Wall Anchor Setting Tool
$0.00
Couldn't load pickup availability
Product Description
• Zinc rust-resistant finish• Dual head Phillips/slotted
1. Place fastener against wall and drive in with hammer. Stop when flange rests against the face of the wall.
2. Turn screw with screwdriver – anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Technical Specifications
| Item#: | 25111 |
|---|---|
| Length | 2-3/8 " |
| Type | Wall Anchor |
| Size | 1/8 " |
| Body Diameter | 1/8 " |
| Diameter | 1/8 " |
| Material | Steel |
| Finish | Zinc |
| Anchor Size | 1/8 x 2-3/8 " |
| Minimum Wall Thickness | 1/8 " |
| Maximum Wall Thickness | 3/4 " |
| Wall Thickness | 1/8 to 3/4 " |
| UNSPSC #: | 31162103 |
| TAA Compliant: | Yes |
| Weight: | 0.98 lb |
