Hollow Wall Screw Anchor, Steel, Zinc Finish, Short Style, 7/16" Drill Size, 1/4-20
(Pack of
50)
SKU:25176 Item#: 25176
• Zinc rust-resistant finish
1. Drill hole recommended diameter. Push anchor into hole and tap until flush with wall surface.
2. Turn screw with screwdriver – anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Frequently Bought Together
Masonry Anchor Phillips Head #14-10 x 2-3/4"
$0.00
Couldn't load pickup availability
Drop-In Anchor Steel 1/2 x 2"
$0.00
Couldn't load pickup availability
Masonry Anchor Hex Washer Head Steel 5/16 x 1-3/4"
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 20mm
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 40mm
$0.00
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 3/8-16
$0.00
Couldn't load pickup availability
Rocker Door and Exterior Molding Retainer
$0.00
Couldn't load pickup availability
Phillips Truss Head Sheet Metal Screw Steel 15mm
$0.00
Couldn't load pickup availability
Front Bumper Specialty Nut Steel M4.2-1.41
$0.00
Couldn't load pickup availability
Tubular Anchor Plastic Orange #16 to #18
$0.00
Couldn't load pickup availability
Tamper-Proof Nail Drive Anchor Steel 1/4 x 2"
$0.00
Couldn't load pickup availability
Tubular Anchor Plastic Orange #16 to #18
$0.00
Couldn't load pickup availability
Product Description
• Zinc rust-resistant finish1. Drill hole recommended diameter. Push anchor into hole and tap until flush with wall surface.
2. Turn screw with screwdriver – anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Technical Specifications
| Item#: | 25176 |
|---|---|
| Length | 2-3/8 " |
| Type | Wall Anchor |
| Body Diameter | 3/8 " |
| Diameter | 1/4 " |
| Material | Steel |
| Screw Diameter | 1/4-20 Short |
| Finish | Zinc |
| Drill Size | 7/16 " |
| Anchor Size | 1/4 x 2-3/8 " |
| Minimum Wall Thickness | 1/8 " |
| Maximum Wall Thickness | 5/8 " |
| Screw Length | 2 " |
| Wall Thickness | 1/8 to 5/8 " |
| Sleeve Length | 3/8 " |
| UNSPSC #: | 31162103 |
| TAA Compliant: | Yes |
| Weight: | 1.94 lb |
