Combination Drill-Tap, M1 High Speed Steel, 118° Split Point, 3/8"-24, 0.75" Tap Length, 4.07" Overall Length
(Pack of
1)
SKU:59930 Item#: 59930
• Eliminates the need for using a twist drill and a separate tap to achieve a tapped hole
• 118° spiral point
• Three positive driving flats on the shank
• Neck is reduced below minor diameter for added clearance
• Made of M1 high-speed steel
• Made in USA
• Ideal for cordless drills; can be used in hand-held or stationary drills for tapping through holes
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
HSS Combination Drill-Tap M8 x 1.25
$0.00
Couldn't load pickup availability
HSS Combination Drill-Tap 12-24
$0.00
Couldn't load pickup availability
HSS Combination Drill-Tap 1/4-20
$0.00
Couldn't load pickup availability
Aluminum Oxide Grain Locking Grinding Disc 2"
$0.00
Couldn't load pickup availability
General Purpose Reciprocating Saw Blade 8"
$0.00
Couldn't load pickup availability
Scotch-Brite Roloc Bristle Disc 2"
$0.00
Couldn't load pickup availability
34 Oz Manual Sprayer
$0.00
Couldn't load pickup availability
Anti-Rattle/Squeak BRS Tape 10mm x 10'
$0.00
Couldn't load pickup availability
Swirl Remover 16oz
$0.00
Couldn't load pickup availability
Phillips Truss Head Sheet Metal Screw Steel 15mm
$0.00
Couldn't load pickup availability
Wheel Opening Drive Rivet Aluminum 5/32"
$0.00
Couldn't load pickup availability
Front Rear Bumper Specialty Rivet 3.2mm
$0.00
Couldn't load pickup availability
Cryotap 7/16"-20 Bottoming Hand Tap
$0.00
Couldn't load pickup availability
4-Flute HSS Hand Tap Kit M18 x 2.5
$0.00
Couldn't load pickup availability
4-Flute HSS Hand Tap Kit M16 x 2
$0.00
Couldn't load pickup availability
1/4" Cordless Impact Hex Driver Charging Bundle
$0.00
Couldn't load pickup availability
Razor Blade Single Edge w/Notch
$0.00
Couldn't load pickup availability
0.5 HP Reciprocating Air Saw
$0.00
Couldn't load pickup availability
Product Description
• Eliminates the need for using a twist drill and a separate tap to achieve a tapped hole• 118° spiral point
• Three positive driving flats on the shank
• Neck is reduced below minor diameter for added clearance
• Made of M1 high-speed steel
• Made in USA
• Ideal for cordless drills; can be used in hand-held or stationary drills for tapping through holes
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 59930 |
|---|---|
| Type | Combination Drill Tap |
| Point | 118° Split |
| Diameter | 3/8 " |
| Pitch | 24 |
| Tap Length | 0.7500 " |
| Material Thickness | 3/4 " |
| Material | HSS |
| Overall Length | 4.07 " |
| UNSPSC #: | 23241615 |
| TAA Compliant: | Yes |
| Weight: | 0.09 lb |
