Combination Drill-Tap, M1 High Speed Steel, 118° Split Point, M6-1, 0.63" Tap Length, 3.24" Overall Length
(Pack of
1)
SKU:27381 Item#: 27381
• Eliminates the need for using a twist drill and a separate tap to achieve a tapped hole
• 118° spiral point
• Three positive driving flats on the shank
• Neck is reduced below minor diameter for added clearance
• Made of M1 high-speed steel
• Made in USA
• Ideal for cordless drills; can be used in hand-held or stationary drills for tapping through holes
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Cryo-Drap 7/16"-20 Drill & Tap Combo, 135o Split Point, W/Flats
Couldn't load pickup availability
HSS Combination Drill-Tap M5 x 0.8
Couldn't load pickup availability
HSS Combination Drill-Tap 1/2-20
Couldn't load pickup availability
Scotch-Brite Roloc Bristle Disc 2"
Couldn't load pickup availability
Twist-On Surface Conditioning Disc 2" Maroon
Couldn't load pickup availability
Twist-On Surface Conditioning Disc 3" Brown
Couldn't load pickup availability
Wheel Opening Drive Rivet Aluminum 5/32"
Couldn't load pickup availability
Phillips Truss Head Sheet Metal Screw Steel 15mm
Couldn't load pickup availability
Fender Liner Screw Grommet Nylon M5.5
Couldn't load pickup availability
Cryotap M7 x 1.0 Metric Plug Hand Tap
Couldn't load pickup availability
Pilotdrive Cryotap M10 x 1.5 Metric Tri-Pak, Taper, Plug, Bottoming
Couldn't load pickup availability
Cryotap #10-24 Tri-Pak
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability
2Pc Index-Tend Pry Bar Set
Couldn't load pickup availability
Product Description
• Eliminates the need for using a twist drill and a separate tap to achieve a tapped hole• 118° spiral point
• Three positive driving flats on the shank
• Neck is reduced below minor diameter for added clearance
• Made of M1 high-speed steel
• Made in USA
• Ideal for cordless drills; can be used in hand-held or stationary drills for tapping through holes
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 27381 |
|---|---|
| Type | Combination Drill Tap |
| Point | 118° Split |
| Diameter | M6 |
| Pitch | 1.0 mm |
| Tap Length | 0.6300 " |
| Material Thickness | 1/2 " |
| Material | HSS |
| Overall Length | 3.24 " |
| UNSPSC #: | 23241615 |
| TAA Compliant: | Yes |
| Weight: | 0.03 lb |
