Low Profile Portable Magnetic Drill 2"
(Pack of
1)
• Capacity: 2" x 2"
• Height (maximum): 7"
• Weight: 26 lbs.
• Magnet: 2,250 lbs.
• Incredible Capacity: The only low-profile drill on the market with this capacity (2" x 2")
• Reversible handle
NOTE: Magnet needs a minimum of 3/8" of material for the magnet to hold. Insufficient thickness will cause the magnet to lose hold and the system will not allow the motor to start.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
HSS Annular Cutter 7/16"
Couldn't load pickup availability
CryoBore 1-7/16" Dia. Annular Cutter, 2-3/8" Cutting Depth
Couldn't load pickup availability
9/16" Dia. Annular Cutter, 1" Cutting Depth, Pin Not Included
Couldn't load pickup availability
Cryoslash 3-5/8" x 1/2" x 0.025" Air Saw Blade 32 TPI
Couldn't load pickup availability
Double End Drill Bit 1/8"
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 1/4" (M6.5)
Couldn't load pickup availability
Portable Magnetic Drill 1-1/2"
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability
Fender Splash Shield Retainer Nylon 20mm
Couldn't load pickup availability
Fender Splash Shield Push Rivet Nylon 7mm Hole
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability
Blade Disposal Container
Couldn't load pickup availability
Abrasive Hand Pad Commercial Grade 6 x 9"
Couldn't load pickup availability
Product Description
• Capacity: 2" x 2"• Height (maximum): 7"
• Weight: 26 lbs.
• Magnet: 2,250 lbs.
• Incredible Capacity: The only low-profile drill on the market with this capacity (2" x 2")
• Reversible handle
NOTE: Magnet needs a minimum of 3/8" of material for the magnet to hold. Insufficient thickness will cause the magnet to lose hold and the system will not allow the motor to start.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 1574606 |
|---|---|
| Height | 7 " |
| Width | 4 " |
| Length | 13 " |
| Magnetic Dead Lift | 2,250 |
| Motor | 1.6 hp 120V 10A 1200W (Single phase) |
| Arbor Bore | 3/4 " |
| Cutter Diameter | 2 " |
| Depth of Cut | 2 " |
| Drill Point Breakaway | 2250 |
| Magnetic Base | "8" X "3-7/8"X"1.5" |
| Centerline Pilot to Motor Face | 1-19/64 " |
| Centerline Pilot to Magnet Face | 1-25/64 " |
| UNSPSC #: | 23241801 |
| TAA Compliant: | Yes |
