Pilotdrive Cryotap 1/2"-13 Starter Hand Tap
(Pack of
1)
SKU:DY80635017 Item#: DY80635017
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Spot Weld Remover Drill Bit
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
$0.00
Couldn't load pickup availability
Abrasive Bristle Wire Belt Steel 23mm
$0.00
Couldn't load pickup availability
2.1 Round Head Ratchet 3/8 Drive 168 Tooth
$0.00
Couldn't load pickup availability
Cross-Over Socket Set, SAE, 3/8" Drive, 10pc
$0.00
Couldn't load pickup availability
DTM High Build Seam Sealer White 10fl.oz
$0.00
Couldn't load pickup availability
Front/Rear Bumper Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Bumper Clip Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
$0.00
Couldn't load pickup availability
Pilotdrive Cryotap #8-32 Starter Hand Tap
$0.00
Couldn't load pickup availability
HSS Spiral Point Hand Tap 1-8
$0.00
Couldn't load pickup availability
HSS Spiral Point Hand Tap 3-48
$0.00
Couldn't load pickup availability
Carbon Steel Replacement Hand Tap 5/16-18
$0.00
Couldn't load pickup availability
Carbon Steel Replacement Hand Tap M16 x 1.5
$0.00
Couldn't load pickup availability
Cryo-Drap 7/16"-14 Drill & Tap Combo, 135o Split Point, W/Flats
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
$0.00
Couldn't load pickup availability
10" Forman's Favorite Heavy-Duty Copper & Aluminum Cable Cutter Pliers
$0.00
Couldn't load pickup availability
Double Flute Step Drill Bit 1/8 to 1/2"
$0.00
Couldn't load pickup availability
Product Description
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | DY80635017 |
|---|---|
| Type | Fractional |
| Diameter | 1/2 " |
| Pitch | 13 |
| Flutes | 4 |
| Thread Length | 15/16 " |
| H Limits | H3 |
| Overall Length | 3-3/8 " |
| Recommended Drill Size | 27/64 " |
| UNSPSC #: | 23241615 |
| TAA Compliant: | No |
| Weight: | 0.09 lb |
Product Restrictions
